When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The right LED headlights make a world of difference.
I wrote an article for the "Heart of the Beast" magazine for the ZR-1 Net Registry regarding recommended types and ways to install them to avoid accidently causing minor electrical issues. (PM me your email addy & I'll attach the article.)
Last edited by Paul Workman; Nov 13, 2019 at 07:59 AM.
Reason: Typo
The right LED headlights make a world of difference.
I wrote an article for the "Heart of the Beast" magazine for the ZR-1 Net Registry regarding recommended types and ways to install them to avoid accidently causing minor electrical issues. (PM me your email addy & I'll attach the article.)
I tried to send you a PM, but got a message that you are not accepting PMs, my email is cdhaley@friscoauto.com
I do like the cooler light emitted from THIS and I used THAT to make to seamless so I didn't have to do the Circuit Doctor mod and a lot of cut and paste. Should I ever get insane and decide to return to stock, I can take the entire thing off with the LED bulb and stick the stock one on.
I get kind of tired of being blinded by those LED headlights. It happens in both directions, either coming toward or from behind. While I'm glad people can see five miles down the road with the power of three blue suns, it literally burns the corneas of the rest of us.
For the most part it seems like the idiots putting them in stock housing and then not aiming them properly are the primary cupltrits.
I do like the cooler light emitted from THIS and I used THAT to make to seamless so I didn't have to do the Circuit Doctor mod and a lot of cut and paste. Should I ever get insane and decide to return to stock, I can take the entire thing off with the LED bulb and stick the stock one on.
Aklim,,where did you mount the load resistors? Was there any fitment issues ? My car is a 96,,so space available may be different than yours. But still like to know how and where you fit these
Aklim,,where did you mount the load resistors? Was there any fitment issues ? My car is a 96,,so space available may be different than yours. But still like to know how and where you fit these
Thanks,
Erik
I don't know what the difference is. I think they are the same headlight housings? I stuck it inside the housing. It didn't seem like it would make that much more heat so I left it there and put the cover back on.
I put these in mine and it was a simple remove and install as you would with a stock lamp. No wiring change or anything like that. The lighting is awesome and super wide, I can easily see when turning without cornering lamps. I have the same type lamp on my Harley, real nice.