Engine swap
Thread Starter
3rd Gear
Joined: Jan 2022
Posts: 3
Likes: 0
Engine swap
Had an old 60's-70's vintage SBC laying around that used to be in another project. Bored to 355, cam, fuelie heads, etc.... and was looking for something to do with it. Ended up buying an '84 with a blown up motor.
Anyone done this swap? I noticed lots of LS advice but not much on earlier engines.
Thanks in advance.,
Steve and John near Chicago
Anyone done this swap? I noticed lots of LS advice but not much on earlier engines.
Thanks in advance.,
Steve and John near Chicago
Melting Slicks
Joined: Jul 2005
Posts: 2,649
Likes: 863
The engine will drop right in place - The C4 used either a Gen1 or Gen II SBC.
As ex-e-fire mentioned - some of the C4 accessories might not bolt up - but if your heads have the right holes - not a problem.
Good luck with the swap.
As ex-e-fire mentioned - some of the C4 accessories might not bolt up - but if your heads have the right holes - not a problem.
Good luck with the swap.
Pro
Joined: Dec 2018
Posts: 733
Likes: 424
From: Wisconsin
2023 Corvette of the Year Finalist - Modified
2022 C4 of the Year Winner - Modified
Finalist 2020 C4 of the Year - Modified
You scan still run the Atari dash. You'll lose the fuel mileage and range features since you aren't running fuel injection any longer though.
