When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I changed my oil and filter for the first time tonight and after taking the jack stands down, I noticed a hole on the driver's side floor board. If you store your car outside, is it typical for rodents and other animals to want to gnaw on different parts of the car. Should I use epoxy the seal the holes up? Thanks!
Last edited by rick Silverman; Aug 22, 2022 at 05:44 PM.
To repair you should sand a inch or so out from the damage. Probably use a little 1" air sander. Clean it really good with acetone. Get a fiberglass repair kit with cloth. Cut a little square of cloth to match area. Apply resin, then cloth, then more resin. Sand smooth if desired. Spray with undercoating.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
1993 C4 Convertible
