Notices
C4 General Discussion General C4 Corvette Discussion not covered in Tech

plan on breaking the Dana36 or the 11's on saturday

Thread Tools
 
Search this Thread
 
Old 04-15-2003, 10:15 AM
  #1  
ScottsLS3
Pro
Thread Starter
 
ScottsLS3's Avatar
 
Member Since: May 2001
Location: Springdale PA
Posts: 717
Likes: 0
Received 0 Likes on 0 Posts

Default plan on breaking the Dana36 or the 11's on saturday

Well after running a 12.4 at the track on Sunday all ive been thinking about is getting that 11 second slip. I had trouble launching with anything more than just at idle.So i went ahead and ordered the Nitto DR's. I'm hoping I dont break anything but into the 11's :D I have these crap 2.59's in there so i hope a good stout launch can pick me up that extra time, i need to get into the boost soon than later. Heres my slips from saturday is the mph enough to get me there?I hope so,plus my belt was slipping.i think i need a 8rib setup. Well chime in and lets hear your thoughts!!!

Old 04-15-2003, 11:10 AM
  #2  
_freakmonkeydogboy_
Drifting
 
_freakmonkeydogboy_'s Avatar
 
Member Since: Jul 2002
Location: OKC Oklahoma
Posts: 1,680
Received 4 Likes on 4 Posts

Default Re: plan on breaking the Dana36 or the 11's on saturday (ScottsLT1)

good luck, for what it's worth :cheers:
Old 04-15-2003, 08:59 PM
  #3  
zelement
Melting Slicks
 
zelement's Avatar
 
Member Since: Sep 2000
Location: Carlsbad, CA CA
Posts: 3,150
Likes: 0
Received 0 Likes on 0 Posts

Default Re: plan on breaking the Dana36 or the 11's on saturday (_freakmonkeydogboy_)

I was running 11.7s for about 3 years with 3.07 and D36. Never had a problem. I was running MT ET streets too, running 1.7x 60ft. I was at the track at least once a month. I hear people breaking them but I guess I was just lucky.

Old 04-15-2003, 09:35 PM
  #4  
GDP
Team Owner
 
GDP's Avatar
 
Member Since: Apr 2002
Posts: 43,370
Likes: 0
Received 0 Likes on 0 Posts

Default Re: plan on breaking the Dana36 or the 11's on saturday (ScottsLT1)

Hmmm, how about upgrading your rear end? :smash:
Old 04-15-2003, 09:55 PM
  #5  
ScottsLS3
Pro
Thread Starter
 
ScottsLS3's Avatar
 
Member Since: May 2001
Location: Springdale PA
Posts: 717
Likes: 0
Received 0 Likes on 0 Posts

Default Re: plan on breaking the Dana36 or the 11's on saturday (GDP)

Hmmm, how about upgrading your rear end? :smash:
Well thats the next project after i get the belt slip problem fixed. trouble is Im waiting to do the 44,tc, and shift kit all at once...$$$$$$$$.
I'm getting a new belt on and the drag radials installed on friday, i hope that gets me to the 11's .

Get notified of new replies

To plan on breaking the Dana36 or the 11's on saturday




Quick Reply: plan on breaking the Dana36 or the 11's on saturday



All times are GMT -4. The time now is 04:43 AM.