Its Alive ! finally,
Thread Starter
Burning Brakes
Joined: Feb 2001
Posts: 1,223
Likes: 0
From: Nashville Tennessee
Its Alive ! finally,
Im thrilled to say the least, the new motor fired right up, instantly, Thanks Jesse (Ski_Dwn_It) for the chip. Good Job, - have to throttle it a couple of times when it first fires up, then it idiles, other than that its doing OK so far, (knock on wood) sounds real healthy, you can hear the cam come it at about 3000-WHOOOoooomMMMMmm, full length headers uncapped, still going thru heat cycles settin the rings, sounds better each time, 383 six in rods, full ported and siemiese runners, heads, ect,ect, YES, :D :party: :party: :party:
thanks Jesse....
still a few items left to do, 50 series flowmasters, ect, ect.
thanks Jesse....
still a few items left to do, 50 series flowmasters, ect, ect.
Race Director
Joined: Aug 2002
Posts: 13,356
Likes: 0
From: tucson AZ
St. Jude Donor '04 & '05
Re: Its Alive ! finally, (jimmyd)
:cool: How great....Congrat's to you...
How does it run on the hwy.?????????????
Ready yet.....
You've done a great job.....
Again Congrat's.....
tony
:cool: :cheers: :cool:
How does it run on the hwy.?????????????
Ready yet.....
You've done a great job.....
Again Congrat's.....
tony
:cool: :cheers: :cool:
Thread Starter
Burning Brakes
Joined: Feb 2001
Posts: 1,223
Likes: 0
From: Nashville Tennessee
Re: Its Alive ! finally, (GDP)
Thanks everyone.......Its still not on the road yet, Im wateing on the brown truck to bring a couple more items, Its one of those deals where a six week project turned into over 3 months. (but what you gona do ?)
Hope to be back on the road by next Friday...maybe..
At least the jack stands are allmost gone !
The intake was baked in a oven to burn off all the old crap. then painted with Dupi-color ceramc engine paint gloss black.
thanks again eweryone for their help, ideas, ect.
Jesse for chip, Patrick96LT4- pict host
:seeya
[Modified by jimmyd, 8:34 AM 5/17/2003]
Hope to be back on the road by next Friday...maybe..
At least the jack stands are allmost gone !
The intake was baked in a oven to burn off all the old crap. then painted with Dupi-color ceramc engine paint gloss black.
thanks again eweryone for their help, ideas, ect.
Jesse for chip, Patrick96LT4- pict host
:seeya
[Modified by jimmyd, 8:34 AM 5/17/2003]
