Analog/Digital Gauge

Reply Subscribe

Thread Tools

Search this Thread

Aug 5, 2003 | 03:40 PM

Fabio7

Thread Starter

Instructor

Joined: Jun 2000

Posts: 221

Likes: 0

From: Andover MA

Analog/Digital Gauge

A piece of wood broke my radiator. I took the corvette to the dealership to fix the radiator. After changing the radiator and fixing the radiator issue, I notice that only the Digital portion of the temperature gauge was working. The Analog gauge at the cluster was not working. I took the vette back to the dealer and now they are saying that cluster is not working. I strongly think that the dealer are wrong. The analog gadge was working before the radiator rupture.
Question: Any suggestion? Does the sensor in top of the Watter Pump control the analog/digital sensor?

Aug 5, 2003 | 04:14 PM

65Z01

Team Owner

Joined: Dec 2000

Posts: 90,675

Likes: 304

From: SE NY

Cruise-In II Veteran

Re: Analog/Digital Gauge (Fabio7)

That's the one for the ECM; the one for the gauges is in the right side of the block near #6 &#8 plugs.

Aug 5, 2003 | 09:16 PM

Fabio7

Thread Starter

Instructor

Joined: Jun 2000

Posts: 221

Likes: 0

From: Andover MA

Re: Analog/Digital Gauge (65Z01)

I just bought the sensor for $14.00,, Question,,, While I am changing the sensor will I get an antifreeze lick out? or not?

Aug 5, 2003 | 09:29 PM

RED-85-Z51

Team Owner

Joined: Jul 2003

Posts: 24,650

Likes: 8

Re: Analog/Digital Gauge (Fabio7)

oh yeah, youll drain the block!

Replace the sensor, and take the thermostat out and refill the block with water and coolant.

Aug 14, 2003 | 08:07 PM

Fabio7

Thread Starter

Instructor

Joined: Jun 2000

Posts: 221

Likes: 0

From: Andover MA

Re: Analog/Digital Gauge (RED-85-Z51)

Red and 65Z01 thanks for the help. It was the sensor near the oil stick #6 cylinder. I change it and it works great. I am writing a letter to the dealer with all data. Thanks again.

Reply Subscribe