4 + 3 trans question
Thread Starter
Burning Brakes
Joined: Jul 2003
Posts: 888
Likes: 0
From: Angola IN
CI 5-6-7-8-9 Veteran
Cruise-In 7 Car Show Winner
4 + 3 trans question
Well wanted to check the fluid level in the OD unit, and was able to do that, but here is the question, How do you add ATF fluid to it? Seems like you have to use a small hose or something. Any ideas, or better solutions?
Thanks guys.
Frank
Thanks guys.
Frank
Thread Starter
Burning Brakes
Joined: Jul 2003
Posts: 888
Likes: 0
From: Angola IN
CI 5-6-7-8-9 Veteran
Cruise-In 7 Car Show Winner
Re: 4 + 3 trans question (garandfan)
Thanks guys, tried using a turkey baster, but it won't work, will try the hose.
Thanks Guys.
Frank
Thanks Guys.
Frank
Pro
Joined: Oct 2002
Posts: 515
Likes: 0
From: Everett WA
Re: 4 + 3 trans question (garandfan)
i took a cap that would go on a **** gun put it on the bottle of fluid, then found a old water toy, that had a nice long hose. shoved that onto the tip of the bottle, and shoved the other end into the od unit... just squeez the bottle till it starts making a big mess. :D
Burning Brakes
Joined: Jul 2003
Posts: 1,098
Likes: 0
From: Plantation Fl
Re: 4 + 3 trans question (NightRyder)
They sell a pump with clear plastic tubes. Put the vette up on jackstands, set the bottle on the floor below and started pumping. I tried the turkey baester too, didn't work
