SES light reset
Thread Starter
Pro
Joined: Dec 2003
Posts: 649
Likes: 0
From: Huntsville Alabama
SES light reset
Is there ant way I can do this without paying a dealership? I know on F-cars you can just turn on the ignition with a certain fuse removed. I just got some bad gas and it is throwing a code so I wanna reset the warning when I fill her back up. Thanks in advance for any help.
H
H
Le Mans Master
Joined: Nov 2002
Posts: 7,080
Likes: 0
From: Corvette valley Georgia
St. Jude Donor '06
Re: SES light reset (hip_about_time)
On a OBD2 you need to connect a scan tool to erase the code, disconnecting the battery wont do that.
Make sure the code that caused the SES light to come on has been repaired. :thumbs:
Make sure the code that caused the SES light to come on has been repaired. :thumbs:
Thread Starter
Pro
Joined: Dec 2003
Posts: 649
Likes: 0
From: Huntsville Alabama
Re: SES light reset (grapeknutz)
Well My T.A has OBD2 and if you remove the ECM fuse and turn the ignition on, but do not start the car, and leave it that way for about 30 seconds it clears out the codes. I would really rather not pay to have it scanned as I am about 99% sure that it is just the bad tank of gas.
[Modified by hip_about_time, 7:20 PM 1/20/2004]
[Modified by hip_about_time, 7:20 PM 1/20/2004]
Le Mans Master
Joined: Nov 2002
Posts: 7,080
Likes: 0
From: Corvette valley Georgia
St. Jude Donor '06
Re: SES light reset (hip_about_time)
Well My T.A has OBD2 and if you remove the ECM fuse and turn the ignition on, but do not start the car, and leave it that way for about 30 seconds it clears out the codes. I would really rather not pay to have it scanned as I am about 99% sure that it is just the bad tank of gas.
[Modified by hip_about_time, 7:20 PM 1/20/2004]
[Modified by hip_about_time, 7:20 PM 1/20/2004]
Go to auto zone they will scan your car for free.
