Hi Temp Rust-O-leum?
Thread Starter
Racer
Joined: Oct 2003
Posts: 392
Likes: 1
From: Sunny Seaside Seabrook Texas (a whole 'nother country)
Hi Temp Rust-O-leum?
Does anyone know of a rust-inhibiting NON-SPRAY paint to coat some welds on an exhaust to prevent rusting? Must be Hi-temp rated. I'd like to coat the welded areas with a brush, not spray (preferably gray primer in color or silver) TIA... :yesnod:
Intermediate
Joined: Nov 2003
Posts: 40
Likes: 0
From: McHenry IL
Re: Hi Temp Rust-O-leum? (MrWiggly)
Use the Barbque Black in the spray cans (from Rust-Oleum) spray a small amount into a soup can and then you can brush it on seams. Make sure seams are clean of rust and comtaminations - wire brush them- have fun.
[Modified by Snoozer, 6:41 PM 2/5/2004]
[Modified by Snoozer, 6:41 PM 2/5/2004]
Drifting
Joined: Dec 2003
Posts: 1,564
Likes: 28
From: Medina OH
Re: Hi Temp Rust-O-leum? (MrWiggly)
Stick with VHT -- we've used it on several cars with great results (as long as the surface is properly prepped). This winter I plan to do my entire exhaust system to match up with the ceramic coated headers.
But it needs to warm up quite a bit first!!!!!!!!!
But it needs to warm up quite a bit first!!!!!!!!!
