No. Va looking for quality maintenance source
Thread Starter
8th Gear
Joined: Apr 2003
Posts: 8
Likes: 0
From: Arlington VA
No. Va looking for quality maintenance source
Peck Chevrolet ISN'T it. I don't do any maintenance myself and need a quality, dependable source in the No. Virginia area for my '95 car. It'll need a brake job soon. Peck can't even manage to reset the oil monitor light after an oil change.
Drifting
Joined: Jan 2002
Posts: 1,550
Likes: 2
From: Woodbridge VA
Re: No. Va looking for quality maintenance source (larel)
I have been going to coopercorvettes for four years and never had any problems. They just recharged my A/C this past weekend. Prices are reasonable.
I think people will also recommend Tony's in MD. Tony's is just to far and expensive for me.
http://www.coopercorvettes.com/
Cooper Corvettes
18313 Jefferson Davis Highway, Triangle, VA 22172
Phone (703) 445-1483
Fax (703) 445-1504
I think people will also recommend Tony's in MD. Tony's is just to far and expensive for me.
http://www.coopercorvettes.com/
Cooper Corvettes
18313 Jefferson Davis Highway, Triangle, VA 22172
Phone (703) 445-1483
Fax (703) 445-1504
Le Mans Master
Joined: Apr 2000
Posts: 5,713
Likes: 105
From: Manassas VA
Re: No. Va looking for quality maintenance source (Crispyc21)
I have had no experiences with any of them but besides coopers, woodbridge dynotech comes highly recommended. I can say dont use dudley martin chevrolet in manassas. 
Safety Car
Joined: Mar 2000
Posts: 3,581
Likes: 1
From: Springfield VA
Re: No. Va looking for quality maintenance source (93 ragtop)
woodbridge dynotech is well known for modding vettes and getting the tuning right.
Absolutely!If you are just looking for a GOOD corvette mechanic to do general maintenence, check out Joe Malo
at Koon's Chevrolet in Tyson's Corner.
Joe actually has an "Ask the Expert" Discussion Area Ask the Expert
on our local Corvette Club Forum. He provides sound advice there and he is the type of mechanic that dealers SHOULD have.
[Modified by 96LT1, 8:13 PM 6/24/2004]
Safety Car
Joined: Feb 2000
Posts: 4,230
Likes: 0
From: VA
Cruise-In II Veteran
Re: No. Va looking for quality maintenance source (96LT1)
woodbridge dynotech is well known for modding vettes and getting the tuning right.
Absolutely!
If you are just looking for a GOOD corvette mechanic to do general maintenence, check out Joe Malo
at Koon's Chevrolet in Tyson's Corner.
Joe actually has an "Ask the Expert" Discussion Area Ask the Expert
on our local Corvette Club Forum. He provides sound advice there and he is the type of mechanic that dealers SHOULD have.
[Modified by 96LT1, 8:13 PM 6/24/2004]
Absolutely!If you are just looking for a GOOD corvette mechanic to do general maintenence, check out Joe Malo
at Koon's Chevrolet in Tyson's Corner.
Joe actually has an "Ask the Expert" Discussion Area Ask the Expert
on our local Corvette Club Forum. He provides sound advice there and he is the type of mechanic that dealers SHOULD have.
[Modified by 96LT1, 8:13 PM 6/24/2004]
Safety Car
Joined: Mar 2000
Posts: 3,581
Likes: 1
From: Springfield VA
Re: No. Va looking for quality maintenance source (ConeKLR)
Still, the service manager refuse to fix all the things the mechanic damaged. So the dealership will not be getting any of my money. That's too bad for me because Joe is a great mechanic.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski