Extra Stuff for a 1996 Vette........
#1
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
Extra Stuff for a 1996 Vette........
I have a few leftover items I hope someone will be interested in. I've tried to price these fair but if you think I'm out of the loop make me an offer. Prefer Paypal as payment but will take a MO. PM with any questions you may have and I will try and answer them.
All of these parts are used except for the AFR springs and seals, the Energy Suspension bushings and the Spicer Ujoints. The bushings are left overs from a kit so check the part numbers to make sure they are what you need/want. As mentioned all of these parts were for a 1996.
LT1 stock intake.............30.00 plus shipping Porting it will sell later
LT1 valve covers............40.00 plus shipping SOLD
LT1 Fuel Rail covers.......35.00 plus shipping SOLD
Band Clamps 1-3" 3-2 3/4...........................15.00 for all plus shipping
A.I.R. Tube (scarce)................................ ......80.00 plus shipping
Granatelli MAF sensor...............................125 .00 shipped Gone to Auction Site
Dana 36 C-Beam with bolts........................30.00 plus shipping Gone to Auction Site
Dana 36 Center Drive Shaft........................20.00 plus shipping Gone to Auction Site
AFR 8017 valve springs
AFR 6612 Valve seals, both brand new in the box they came in................................10.00 plus shipping Gone to Auction Site
Spicer U joints (2) # 5-785 X ......................20.00 plus shipping SOLD
Trick Flow hardened push rods
TFS-21407100,,,,,,,,7.1 X 5/16 X .080............20.00 plus shipping SOLD
Delphi MAF sensor
AF10056 ........................................ ...........45.00 shipped
Energy Suspension bushings
3.5141 G
3.5151 G
3.7108 G....................................... .............35.00 for all shipped SOLD
https://picasaweb.google.com/1082187...eat=directlink
All of these parts are used except for the AFR springs and seals, the Energy Suspension bushings and the Spicer Ujoints. The bushings are left overs from a kit so check the part numbers to make sure they are what you need/want. As mentioned all of these parts were for a 1996.
LT1 stock intake.............30.00 plus shipping Porting it will sell later
LT1 valve covers............40.00 plus shipping SOLD
LT1 Fuel Rail covers.......35.00 plus shipping SOLD
Band Clamps 1-3" 3-2 3/4...........................15.00 for all plus shipping
A.I.R. Tube (scarce)................................ ......80.00 plus shipping
Granatelli MAF sensor...............................125 .00 shipped Gone to Auction Site
Dana 36 C-Beam with bolts........................30.00 plus shipping Gone to Auction Site
Dana 36 Center Drive Shaft........................20.00 plus shipping Gone to Auction Site
AFR 8017 valve springs
AFR 6612 Valve seals, both brand new in the box they came in................................10.00 plus shipping Gone to Auction Site
Spicer U joints (2) # 5-785 X ......................20.00 plus shipping SOLD
Trick Flow hardened push rods
TFS-21407100,,,,,,,,7.1 X 5/16 X .080............20.00 plus shipping SOLD
Delphi MAF sensor
AF10056 ........................................ ...........45.00 shipped
Energy Suspension bushings
3.5141 G
3.5151 G
3.7108 G....................................... .............35.00 for all shipped SOLD
https://picasaweb.google.com/1082187...eat=directlink
Last edited by Weav's Vet; 03-20-2012 at 08:49 AM.
#5
Burning Brakes
I will take the valve covers if available. PM on the way.
#7
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
17.00 with UPS by weight but I'm not sure about their restrictions for length. If that is somewhere close let me know and I'll get a better estimate but I'll probably have to make a box for it to get it precise. I'd need a little time for that.
#8
Safety Car
Thread Starter
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
Now I know some of you guys must need the LT1 intake I have here for sale. It would be a good piece to get you going on that porting adventure you've been wanting to try your hand at. Have a little fun/learn something, make a little mess and add a few pony's to your engine. Get it now!
#9
Burning Brakes
The valve covers and puhrods arrived with an unexpected bonus, an oil filler cap better than the one I had. The pushrods are excellent.
Thank you!
Thank you!