For sale- several 1993 corvette parts
11-17-2012, 07:57 PM
#21
Instructor
Thread Starter
It's shipped! Thanks!
Your referring to the brackets to the side of sail panels in the trunk area?
The third brake light is broken. Your referrig to the taillights?
I've still got them. $50 shipped for the RH power window switch assembly.
I'll post pictures!
Already trashed. It was broken.
Yes and it works too! How's $75 shipped.
I'll post pictures!
Already trashed. It was broken.
Yes and it works too! How's $75 shipped.
Last edited by Cowansauto; 11-17-2012 at 11:36 PM.
11-17-2012, 08:06 PM
#22
Melting Slicks
How much for the BCM (body computer) I can get a rebuilt one for $112 http://www.rockauto.com/catalog/x,ca...,parttype,2888
Last edited by tpi 421 vette; 11-17-2012 at 08:17 PM.
11-17-2012, 09:02 PM
#23
Instructor
Thread Starter
How much for the BCM (body computer) I can get a rebuilt one for $112 http://www.rockauto.com/catalog/x,ca...,parttype,2888
Last edited by Cowansauto; 11-17-2012 at 09:08 PM.
11-21-2012, 12:04 AM
#26
Instructor
Thread Starter
11-28-2012, 02:22 AM
#28
Instructor
Thread Starter
The hull of the car is gone now. Friend from Bowling Green is using it to build another car.
I still have many parts left though. Please see list on first page. Thanks!
I still have many parts left though. Please see list on first page. Thanks!
11-28-2012, 07:55 PM
#30
Instructor
Thread Starter
Yes sir the carpet is in really good shape. The only issue I found is common for these cars is on the rear section where it goes under the rear plastic panel. The carpet is held up by plastic pins that are mounted across the decklid. All the resting weight on the carpet makes the tabs cut out of the carpet rip open. As with most carpeting you'll find this because of this design flaw. I would use some type of epoxy to mend the slits back together which are hidden under the panel anyways.
11-28-2012, 10:47 PM
#31
Yes sir the carpet is in really good shape. The only issue I found is common for these cars is on the rear section where it goes under the rear plastic panel. The carpet is held up by plastic pins that are mounted across the decklid. All the resting weight on the carpet makes the tabs cut out of the carpet rip open. As with most carpeting you'll find this because of this design flaw. I would use some type of epoxy to mend the slits back together which are hidden under the panel anyways.
Sold! Will PayPal you tomorrow in the am. My car gose in for paint this weekend so ground is cool.
The last owner halfway and halfassed tried to convert the interior to black from tan. So I have black door panels with black seats and tan carpeting WTF?
Do you have any other interior trim? Need door handel bezels (drivers side at least) read shelf trim. And some other odds and ends. Was looking for a complete interior minus the seats.
Thanks.
Jeremy
11-29-2012, 01:37 PM
#32
Sold! Will PayPal you tomorrow in the am. My car gose in for paint this weekend so ground is cool.
The last owner halfway and halfassed tried to convert the interior to black from tan. So I have black door panels with black seats and tan carpeting WTF?
Do you have any other interior trim? Need door handel bezels (drivers side at least) read shelf trim. And some other odds and ends. Was looking for a complete interior minus the seats.
Thanks.
Jeremy
The last owner halfway and halfassed tried to convert the interior to black from tan. So I have black door panels with black seats and tan carpeting WTF?
Do you have any other interior trim? Need door handel bezels (drivers side at least) read shelf trim. And some other odds and ends. Was looking for a complete interior minus the seats.
Thanks.
Jeremy
Please confirm it was received.
Thanks
11-30-2012, 12:45 AM
#33
Instructor
Thread Starter
I still have the drivers side door handle bezel. The RH is cracked unfortunately.
I'm shipping out your carpet tomorrow! Thanks!
11-30-2012, 01:11 AM
#34
Car is a 92 however the doors panels i am unsure of they don't have any carpet or signs of ever having it. Does not appear to have a recess either.
I currently have the lower dash pads in black on both sides and some black door stils with front speaker covers (carpet is a bit worn). The kick panel carpet is tan on the sides that are on the transmission side as is the floor and rear. My seats are black. The halos are painted black (halfassed) as are the Seatbelt covers and other misc stuff. How much to toss in the LH bezel? I also need a transmission dust cover auto.
12-02-2012, 10:30 AM
#35
Thank you!
Car is a 92 however the doors panels i am unsure of they don't have any carpet or signs of ever having it. Does not appear to have a recess either.
I currently have the lower dash pads in black on both sides and some black door stils with front speaker covers (carpet is a bit worn). The kick panel carpet is tan on the sides that are on the transmission side as is the floor and rear. My seats are black. The halos are painted black (halfassed) as are the Seatbelt covers and other misc stuff. How much to toss in the LH bezel? I also need a transmission dust cover auto.
Car is a 92 however the doors panels i am unsure of they don't have any carpet or signs of ever having it. Does not appear to have a recess either.
I currently have the lower dash pads in black on both sides and some black door stils with front speaker covers (carpet is a bit worn). The kick panel carpet is tan on the sides that are on the transmission side as is the floor and rear. My seats are black. The halos are painted black (halfassed) as are the Seatbelt covers and other misc stuff. How much to toss in the LH bezel? I also need a transmission dust cover auto.
Also can you pm me the tracking number?
12-05-2012, 06:38 PM
#36
Better than described.
Thank you sooooo much!!!!
I do still need the panels that lay against the transmission hump. I have the ones that mount to the underside of the dash however.
I could use that handel bezel and (odds and ends) black bezels for the rear.
12-17-2012, 11:12 PM
#38
I really could use that engine harness!! Does it have the fuse block and the connection that goes in the drivers dash plus the three under dash connections from the passenger side? If so what is the best price you can give me on it?
12-18-2012, 01:53 AM
#39
Instructor
Thread Starter
Carpwr received today!
Better than described.
Thank you sooooo much!!!!
I do still need the panels that lay against the transmission hump. I have the ones that mount to the underside of the dash however.
I could use that handel bezel and (odds and ends) black bezels for the rear.
Better than described.
Thank you sooooo much!!!!
I do still need the panels that lay against the transmission hump. I have the ones that mount to the underside of the dash however.
I could use that handel bezel and (odds and ends) black bezels for the rear.
12-18-2012, 08:24 AM
#40
[QUOTE=Cowansauto;1582597104]The harness connectors were disconnected wherever they go thru the firewall. Nothing was cut or anything. I'll take a picture of what's included. It's been awhile since I removed the harness to remember where the connectors went to under the dash behind firewall]
Thanks a lot! if you want to send some pics ill pm you my number and you can send them there
Thanks a lot! if you want to send some pics ill pm you my number and you can send them there