FS: from 86 coupe parted out : interior and electrical
#1
Instructor
Thread Starter
from 86 coupe parted out : interior and electrical
good working condition parts. Off a 86 coupé.
will ship 48 lower states
payment cashiers check, usps money order, chase quick pay or square cash.me. No paypal.
interior and electrical
front end
rear end
underhood and drivetrain
bumper covers
ABS pump 80
accelerometer $15
3-row relay bracket $10
spkr grill $12, front, 2 available
spkr grill, non-bose systems, dash, 2 avail, $10 ea
VATS $40, working.
chime module $25
multifunction lever $40
power lock actuator $10
kick panel $15 tan
halo light complete $20, both sides available
spark / knock module $40
seat switches with harness, uncut $20
Header trim (horizontal, inside, top of windshield, between Pillar Posts) $60
Courtesy Light in Door $30
door inside hardware : rods, levers, small fasteners, set for $40
power window motor $20
window regulator, late C4 style, pass side $40
parking brake assembly ,$30
Steering wheel, leather cover needs replaced, $60
Complete telescopic steering column, for auto trans, disassembled.needs new bearing. Includes rod and ignition switch plus hi/lo beam switch $100
DIC lens. left lower pictogram id for Overdrive. $40
throttle pedal complete assembly, $30
set of seatbelts, tan, $100
belt receptors, black, $ 20 pair
odometer 197000 miles, $50
cargo shade $30
breadbox $30
hood open lever $20
many pigtails and harness, one intact rear harness serving antenna, hatch, tail lights, fuel pump,...
Also available, original screws, clips, rods, and bolts. Ask whatever gizmo you need from those boxes.
the digital dash HAS BEEN SOLD already
thks for viewing
will ship 48 lower states
payment cashiers check, usps money order, chase quick pay or square cash.me. No paypal.
interior and electrical
front end
rear end
underhood and drivetrain
bumper covers
ABS pump 80
accelerometer $15
3-row relay bracket $10
spkr grill $12, front, 2 available
spkr grill, non-bose systems, dash, 2 avail, $10 ea
VATS $40, working.
chime module $25
multifunction lever $40
power lock actuator $10
kick panel $15 tan
halo light complete $20, both sides available
spark / knock module $40
seat switches with harness, uncut $20
Header trim (horizontal, inside, top of windshield, between Pillar Posts) $60
Courtesy Light in Door $30
door inside hardware : rods, levers, small fasteners, set for $40
power window motor $20
window regulator, late C4 style, pass side $40
parking brake assembly ,$30
Steering wheel, leather cover needs replaced, $60
Complete telescopic steering column, for auto trans, disassembled.needs new bearing. Includes rod and ignition switch plus hi/lo beam switch $100
DIC lens. left lower pictogram id for Overdrive. $40
throttle pedal complete assembly, $30
set of seatbelts, tan, $100
belt receptors, black, $ 20 pair
odometer 197000 miles, $50
cargo shade $30
breadbox $30
hood open lever $20
many pigtails and harness, one intact rear harness serving antenna, hatch, tail lights, fuel pump,...
Also available, original screws, clips, rods, and bolts. Ask whatever gizmo you need from those boxes.
the digital dash HAS BEEN SOLD already
thks for viewing
Last edited by amy FL; 05-11-2019 at 10:58 AM.
#2
Le Mans Master
saddle (tan) console cover in decent shape? door panels? heater/as control thingy in the dash? Is the rearview mirror clear? ? l live in Avon, Indiana. Its next to Indianapolis..45123, thanks. Oh is that the heaer core that you listed? And what parts contained I the parking brake offer? fuel pump and fuel level good? I too have an 86. headlight motors complete assy.? do window motors? There is one just listed local for parts so my wants/needs will change.
Last edited by ghoastrider1; 03-23-2019 at 11:44 AM.
#3
Instructor
Thread Starter
Hello, Rider
maany answers here :
what is NOT available
(tan) console cover in decent shape ; door panels ; heater/as control thingy in the dash ; rearview mirror ;
now some positive :
is that the heaer core that you listed? yes
parts contained I the parking brake offer ? full lever assembly
fuel pump and fuel level good ? risks are pump is corroded. I Did not remove the plunger from tank. level meter is usually recoverable with gently sanding. Safer to buy a new pump as you know what happens when this thing dies on you.
headlight motors complete assy.? motors are here and good but when unbolting the 13 mm it snapped on both.pics.
I have the lower and upper cover for passenger side $20 ea / $30 both
do window motors? I have one complete window mechanism pass side, late version (not the ribbon type)
tell me if you need more parts, I did not process the front of car nor engine chapter.
maany answers here :
what is NOT available
(tan) console cover in decent shape ; door panels ; heater/as control thingy in the dash ; rearview mirror ;
now some positive :
is that the heaer core that you listed? yes
parts contained I the parking brake offer ? full lever assembly
fuel pump and fuel level good ? risks are pump is corroded. I Did not remove the plunger from tank. level meter is usually recoverable with gently sanding. Safer to buy a new pump as you know what happens when this thing dies on you.
headlight motors complete assy.? motors are here and good but when unbolting the 13 mm it snapped on both.pics.
I have the lower and upper cover for passenger side $20 ea / $30 both
do window motors? I have one complete window mechanism pass side, late version (not the ribbon type)
tell me if you need more parts, I did not process the front of car nor engine chapter.
Last edited by amy FL; 03-28-2019 at 02:17 PM.
#5
Instructor
Thread Starter
#14
Racer
Member Since: Aug 2014
Location: Bossier City Louisiana
Posts: 269
Likes: 0
Received 4 Likes
on
4 Posts
Looking for the mirror adjuster switch and at least the mirror motors, both sides, mirror and motor assembly. I don't need the shells but I didn't see any of these items on your list.
Thanks
Russ
Thanks
Russ
#15
Instructor
Thread Starter
here is what I have in the outside mirrors dept.
2 passenger glasses with plate. One has new glass with bullseye to avoid dead angle. other has chip in one corner (how do people do this ? )
mirror surfaces are very good ; pics don't do justice to this here.
motors tested to work good. a vented model other not.
one trunnion, a pigtail, two plastic plates for mirror shells.
I also have the pass and drv shells as well as the mounting mracket for motors inside the shell.
other harness parts available as well.
no joystick.
2 passenger glasses with plate. One has new glass with bullseye to avoid dead angle. other has chip in one corner (how do people do this ? )
mirror surfaces are very good ; pics don't do justice to this here.
motors tested to work good. a vented model other not.
one trunnion, a pigtail, two plastic plates for mirror shells.
I also have the pass and drv shells as well as the mounting mracket for motors inside the shell.
other harness parts available as well.
no joystick.
#16
Racer
Member Since: Aug 2014
Location: Bossier City Louisiana
Posts: 269
Likes: 0
Received 4 Likes
on
4 Posts
Well Amy, it all looks like the stuff I need to make mine work. I noticed my pass side was heated like I noticed on yours but something I never considered until I noticed yours. That doesn't seem to matter too much here in the south . I don't really need the inner hardware for mirror motor mounts but curious about the backing plates for the mirrors. Do they just pop off or glued? Will have to look closer at mine. And yeah, how do people chip these things!
So, let me know what you want for them please. My address, for shipping cost look up is;
Russ Lawson
1284 Schex Dr
Bossier City , Louisiana
71112
Thanks
So, let me know what you want for them please. My address, for shipping cost look up is;
Russ Lawson
1284 Schex Dr
Bossier City , Louisiana
71112
Thanks