Mark Williams halfshafts & rear end parts
09-14-2004, 01:51 PM
#1
Melting Slicks
Thread Starter
Mark Williams halfshafts & rear end parts
I am changing over to a Ford 9" & 4 link. I blew the Dana 44 case apart, so that part is no good, but have everything else for sale and is in good shape.
Mark Williams Chrome Moly halfshafts. These have forged chrome moly yokes, chrome moly tube, and Mark Williams Hi-Impact u joints. These U joints are not an off the shelf U joint. Their torque capacity is 4200 ft/lbs. They are the same ones used in 6 second Pro Mod cars.These halfshafts maybe have 7-8 runs on them and are 1 1/2 months old. They are the strongest and lightest steel halfshafts you can buy. Perfect condition. I paid $750+shipping. I also have cryoed spindles, I have Doug Rippie trailing arm brackets & camber brackets, batwing, bearing housings, tie rod assembly, all other IRS parts. Basically everything minus the Dana 44 centersection and brakes. I also have a Dana 44 C beam (with a driveshaft loop), and driveshaft that has been cryoed. I also have a Z07 rear spring. One other thing... everything has been upgraded to urethane bushings. I would take $1800 for everything, or I will part it out. I would prefer to sell everything together.
Edit: also included FX3 adjustable rear shocks.
Mark Williams Chrome Moly halfshafts. These have forged chrome moly yokes, chrome moly tube, and Mark Williams Hi-Impact u joints. These U joints are not an off the shelf U joint. Their torque capacity is 4200 ft/lbs. They are the same ones used in 6 second Pro Mod cars.These halfshafts maybe have 7-8 runs on them and are 1 1/2 months old. They are the strongest and lightest steel halfshafts you can buy. Perfect condition. I paid $750+shipping. I also have cryoed spindles, I have Doug Rippie trailing arm brackets & camber brackets, batwing, bearing housings, tie rod assembly, all other IRS parts. Basically everything minus the Dana 44 centersection and brakes. I also have a Dana 44 C beam (with a driveshaft loop), and driveshaft that has been cryoed. I also have a Z07 rear spring. One other thing... everything has been upgraded to urethane bushings. I would take $1800 for everything, or I will part it out. I would prefer to sell everything together.
Edit: also included FX3 adjustable rear shocks.
Last edited by tpi 421 vette; 09-14-2004 at 02:14 PM.
09-14-2004, 05:53 PM
#4
Team Owner
Originally Posted by tpi 421 vette
....batwing. I also have a Dana 44 C beam (with a driveshaft loop), and driveshaft that has been cryoed.
09-14-2004, 07:07 PM
#6
Melting Slicks
Member Since: Jan 2004
Location: walkersville md
Posts: 2,979
Likes: 0
Received 0 Likes
on
0 Posts
how much for cro-mo half shafts w/U joints. and driveshaft? can i get sum pics sent to Hippiehead025@starpower.net plz? and cost fpr shipping to 21793.
09-14-2004, 07:50 PM
#7
Melting Slicks
Thread Starter
OK guys... I really need to give this thread a few days before I start parting everything out. I would really prefer to sell everything at once.
Thanks
Thanks
09-15-2004, 01:13 PM
#12
Melting Slicks
Thread Starter
OK Guys, I have decided to part everything out. Some of the parts may not be available for 1 1/2-2 weeks. I need to keep my car together enough to trailer it to my chassis guy. So it needs to be able to roll until he is ready. One other thing... we will start fresh from this point. I haven't listed any asking prices, and don't know who's serious and who's not. So from this point... first come first serve. So here are my asking prices:
Mark Williams chrome moly halfshafts $600
Dana 44 batwing w/urethane bushings $300
C Beam with driveshaft loop $150
Cryoed driveshaft for ZF6 $150
2-Cryoed spindles $200 pair
Doug Rippie trailing arm brackets 88-96 $70 SOLD
Doug Rippie camber brackets 88-96 $70 SOLD
4- trailing arms with urethane bushings $100
Z07 rear spring $300 (very rare)
2-FX3 adjustable rear shocks $100 each
2-FX3 shock actuators $75 each
2-cryoed Dana 44 stub axles $125pair
Dana 44 stock carrier cryoed (not in the car when rear end broke) Perfect condition $300
Right and left knuckles (bearing housing) $100 each
Everything that has been cryoed was done by Jeb@Deep Freeze Cryo. All parts are plus shipping. My zip code is 84118
Mark Williams chrome moly halfshafts $600
Dana 44 batwing w/urethane bushings $300
C Beam with driveshaft loop $150
Cryoed driveshaft for ZF6 $150
2-Cryoed spindles $200 pair
Doug Rippie trailing arm brackets 88-96 $70 SOLD
Doug Rippie camber brackets 88-96 $70 SOLD
4- trailing arms with urethane bushings $100
Z07 rear spring $300 (very rare)
2-FX3 adjustable rear shocks $100 each
2-FX3 shock actuators $75 each
2-cryoed Dana 44 stub axles $125pair
Dana 44 stock carrier cryoed (not in the car when rear end broke) Perfect condition $300
Right and left knuckles (bearing housing) $100 each
Everything that has been cryoed was done by Jeb@Deep Freeze Cryo. All parts are plus shipping. My zip code is 84118
Last edited by tpi 421 vette; 09-16-2004 at 09:52 AM.
09-15-2004, 04:04 PM
#14
Safety Car
Do you have your 9 inch third member yet? If not I have one for sale. Here is a link the auction I had for them:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7919842913
Tony
http://cgi.ebay.com/ebaymotors/ws/eB...tem=7919842913
Tony
09-15-2004, 06:50 PM
#17
Melting Slicks
Member Since: Jan 2004
Location: walkersville md
Posts: 2,979
Likes: 0
Received 0 Likes
on
0 Posts
hey man actually what si shipping on those halfshafts to 21793??? I might have convinced my dad to give me $ to get these. They are 100% tru though correct? no warping, etc.???
