Superram pics
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Superram pics
OK, it is still not running, but should be this weekend,
too many "Honey do's" already this spring.
Well, here is my SR "theme" so its a little of the polished look and a little fo the Powder Coat look! It's not as Clean as Caboboy's but, hey, here it is!
EDIT: Mirror polished by Mike at www.polishinginc.com
Powder coat by Chris at www.cecoatings.com
too many "Honey do's" already this spring.
Well, here is my SR "theme" so its a little of the polished look and a little fo the Powder Coat look! It's not as Clean as Caboboy's but, hey, here it is!
EDIT: Mirror polished by Mike at www.polishinginc.com
Powder coat by Chris at www.cecoatings.com
Pro
Joined: Nov 2004
Posts: 677
Likes: 0
From: Frisco TX
Originally Posted by LD85
OK, it is still not running, but should be this weekend,
too many "Honey do's" already this spring.
Well, here is my SR "theme" so its a little of the polished look and a little fo the Powder Coat look! It's not as Clean as Caboboy's but, hey, here it is!
EDIT: Mirror polished by Mike at www.polishinginc.com
Powder coat by Chris at www.cecoatings.com
too many "Honey do's" already this spring.
Well, here is my SR "theme" so its a little of the polished look and a little fo the Powder Coat look! It's not as Clean as Caboboy's but, hey, here it is!
EDIT: Mirror polished by Mike at www.polishinginc.com
Powder coat by Chris at www.cecoatings.com
! Where did you get your super ram from?RocketSapp
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Originally Posted by RocketSapp
That looks ! Where did you get your super ram from?
RocketSapp
! Where did you get your super ram from?RocketSapp
Thanks Cuisi ! I should have it on the road later Saturday.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Le Mans Master
Joined: Dec 2002
Posts: 5,270
Likes: 3
From: Seattle Area WA
Very cool!
I wanted to do my engine bay in a red theme and was thinking of several ideas, some similar to yours (the lid). But mine does not have the polished box. I like it!
Man, you guys sure do put the bar high!!!
Did I mention how great it looks!!!
I wanted to do my engine bay in a red theme and was thinking of several ideas, some similar to yours (the lid). But mine does not have the polished box. I like it!
Man, you guys sure do put the bar high!!!
Did I mention how great it looks!!!
Last edited by USAsOnlyWay; Apr 14, 2005 at 01:03 AM.
Le Mans Master
Joined: Mar 2002
Posts: 5,889
Likes: 2
From: Castro Valley Calif.
St. Jude Donor '03 thru '26
Geeze Larry, that's gorgeous! I'm getting weaker and weaker on the small distributor.........it makes things look so much more clean and accessible. Good luck on it this weekend Bud!
I'm getting weaker and weaker on the small distributor.........it makes things look so much more clean and accessible. Good luck on it this weekend Bud!
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Thanks guys, I guess I will find out how tough is is to keep the polished area clean as time goes on!
Tim, the small distributor is very nice clearance wise, I have yet to drive the car to figure out if there will be any spark issues, but I must say it is a nice setup, the Billet distributor comes with an oiling hole for the cam drive gear too. Keep an eye on eBay or look at the Mallory distributor too.
Tim, the small distributor is very nice clearance wise, I have yet to drive the car to figure out if there will be any spark issues, but I must say it is a nice setup, the Billet distributor comes with an oiling hole for the cam drive gear too. Keep an eye on eBay or look at the Mallory distributor too.
Race Director
Joined: May 2003
Posts: 10,749
Likes: 41
Originally Posted by LD85
Thanks guys, I guess I will find out how tough is is to keep the polished area clean as time goes on!
Tim, the small distributor is very nice clearance wise, I have yet to drive the car to figure out if there will be any spark issues, but I must say it is a nice setup, the Billet distributor comes with an oiling hole for the cam drive gear too. Keep an eye on eBay or look at the Mallory distributor too.
Tim, the small distributor is very nice clearance wise, I have yet to drive the car to figure out if there will be any spark issues, but I must say it is a nice setup, the Billet distributor comes with an oiling hole for the cam drive gear too. Keep an eye on eBay or look at the Mallory distributor too.
what kind of power do u think it will be making?
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Originally Posted by 88BlackZ-51
what kind of power do u think it will be making?
I expect a decent jump in RWTQ, maybe I'm guessing, up to 35-45-RWTQ and a the same or less RWHP @ 380 RWHP but I am basing this on the untuned dyno numbers seen in my sig.
I was told by Dynotech that my Miniram would hit at least 415-425-RWHP with a good tune, but it never got that far.
So time will tell. Mainly I am hoping that my ET's are the same or better.
Thread Starter
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Thanks again guys, I am so excited to "maybe" get it off the ramps this weekend, we'll see, coaching 5-6-7 year olds for Little League and other things have pulled me every which way!
But it is so so close!
But it is so so close!