DTC Code 11?
Thread Starter
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
DTC Code 11?
Does error code 11 even exist on an LT1? I data logged my car this morning and Datamaster shows a DTC error. If you double click on this it says DTC 11 n/a
In the past where I have had problems with this is where I've had a trouble code and then never cleared it from the computer, datamaster still picks it up. I'm sure this is still the case because the car is running perfectly and there is no SES light. I'm sure it is just an old stored code, but what is it exactly?
EDIT BTW I'm not that helpless, I just happen to be at work and don't have my manual in front of me.
In the past where I have had problems with this is where I've had a trouble code and then never cleared it from the computer, datamaster still picks it up. I'm sure this is still the case because the car is running perfectly and there is no SES light. I'm sure it is just an old stored code, but what is it exactly?
EDIT BTW I'm not that helpless, I just happen to be at work and don't have my manual in front of me.
Last edited by Nathan Plemons; Jun 3, 2005 at 08:31 AM.
Burning Brakes
Joined: Apr 2000
Posts: 980
Likes: 2
From: Chandler AZ
I think Code 11 is
Code 11 in my book is defective nut holding the steering wheel. J/K
I couldn't find it in my books. I have a 90 and 96 book. It may be year specific?
Edit: I was trying to find it through searching on the internet and couldn't find it either.
Edit2: OK I did find a chart that showed code 11. It is for a different model with an LT1 in it. The list is at Code List
Hope this helps.
I couldn't find it in my books. I have a 90 and 96 book. It may be year specific?
Edit: I was trying to find it through searching on the internet and couldn't find it either.
Edit2: OK I did find a chart that showed code 11. It is for a different model with an LT1 in it. The list is at Code List
Hope this helps.
Last edited by VAHROOM; Jun 3, 2005 at 01:37 PM.
Thread Starter
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Turns out there is no code 11. It also turns out that if I double click on that again I don't get code 11. I must have somehow got too happy with the mouse. Anyway I just checked the ECM manually and it gave me a history code 72. The problem is that code 72 should only ever come on with an auto transmission!
I cleared the code, we'll see if it comes back. I'm thinking it's just a fluke.
I cleared the code, we'll see if it comes back. I'm thinking it's just a fluke.
