Camber-brace Special!!!!!!!!
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Camber-brace Special!!!!!!!!
We’ve decided to run a short term special on Camber-braces. It’s been awhile since the last one and I’ve been getting a few emails inquiring about a Gp for them. I’m going to do it a little different this time, instead of a Gp, it’s going to be a bottom dollar sale for a short period. How short? The sale will end July 4th, no exceptions.
I’m not going to advertise the price, but trust me if you’re even thinking about the Camber-brace, give me a call. The pricing will be the cheapest that it has been in 2 years. Since I’m sure there will be a lot of members take advantage of the sale, there could be up to a 2 week lead time, but we will fill the orders as fast as we can on a first come, first serve basis.
To place your order, you will have to call to get the special price and to place your order. If you want to use your PayPal account, I will work that out with you on the phone.
If you have any questions, feel free to drop me an email, but I will not tell you the price unless you call.
Thanks,
Dave
I’m not going to advertise the price, but trust me if you’re even thinking about the Camber-brace, give me a call. The pricing will be the cheapest that it has been in 2 years. Since I’m sure there will be a lot of members take advantage of the sale, there could be up to a 2 week lead time, but we will fill the orders as fast as we can on a first come, first serve basis.
To place your order, you will have to call to get the special price and to place your order. If you want to use your PayPal account, I will work that out with you on the phone.
If you have any questions, feel free to drop me an email, but I will not tell you the price unless you call.
Thanks,
Dave
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by vpunteney
How about a ball park number or normal retail so I have some type of idea. Then for us basic wrench's, how difficult is it to install or does it need to be done at a shop?
Thanks, Vinnie
Thanks, Vinnie
I'd say 80% of the current owners have installed their own.
Dave
Melting Slicks
Joined: Mar 2005
Posts: 2,352
Likes: 230
From: Northeast FL
Originally Posted by 92LT-1BoughtItRight
this is an awesome improvement to any C4's ride and handling.
Two thumbs up!!!
Two thumbs up!!!
Race Director
Joined: Aug 2003
Posts: 11,043
Likes: 3
From: San Jose Pat Tillman - American Hero
The R-D Camber Brace is a "must have" for any C4 enthusiast. I purchased mine last year, and can't say enough good things about the product, and Dave as well. I am definitely what you might call a "novice wrench", and even I was able to do this install with BASIC hand tools. I bought a couple things to do the install (open ended wrenches, etc.), but I would've needed them down the road anyway.
After installation, I immediately noticed that the nose just felt more "planted." Some of the creaks I previously had went away, and the improvement in handling was drastically improved.
If Dave's price is even half as good as he's hinting at, you can't pass this up. Thanks for a great product, Dave!!!
After installation, I immediately noticed that the nose just felt more "planted." Some of the creaks I previously had went away, and the improvement in handling was drastically improved.
If Dave's price is even half as good as he's hinting at, you can't pass this up. Thanks for a great product, Dave!!!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Mar 2005
Posts: 2,352
Likes: 230
From: Northeast FL
Originally Posted by ed petrucci
now is this the one that goes in the engine bay, or behind the seats in cargo bay? pictures?
Race Director
Joined: Apr 2000
Posts: 15,344
Likes: 4,009
From: Texas
Originally Posted by ed petrucci
now is this the one that goes in the engine bay, or behind the seats in cargo bay? pictures?
Installed:
I just ordered that exact one myself. Dave has a nice deal going.
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Originally Posted by jwt1603
What about drivability? Does the ride get much worse?
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by ~db~
Doesn't this mod require an alignment to be done afterward?? That was my understanding... 
Dave
Le Mans Master
Joined: Oct 2000
Posts: 6,202
Likes: 9
From: St. louis, MO
Originally Posted by Nathan Plemons
Not at all, in fact the car will drive better because the front will hold its alignment through a wider range of conditions. It's not something that I drive every day and say "man am I glad I got the Camber Brace," I've just gotten so used to it. But rather when I drive a C4 without one I find myself saying "damn, this thing handles like crap"
