C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

How do you disconnect O2 sensor connector

Thread Tools
 
Search this Thread
 
Old Jul 12, 2005 | 08:50 PM
  #1  
stormin310's Avatar
stormin310
Thread Starter
Racer
10 Year Member
 
Joined: May 2005
Posts: 279
Likes: 0
From: houston texas
Default How do you disconnect O2 sensor connector

Bought a new O2 sensor today and socket and can't get the connector apart whats the trick........HELP
Reply
Old Jul 16, 2005 | 06:24 PM
  #2  
stormin310's Avatar
stormin310
Thread Starter
Racer
10 Year Member
 
Joined: May 2005
Posts: 279
Likes: 0
From: houston texas
Default

Replaced post cat O2 sensor this morning about a 30 minute job special socket wouldn;t work went back to autozone and got my $9.99 back wasn't enought room with ratchet had to use 7/8 inch open in wrench. Started up no more "Service Soon Light" about a 30 minute job.....used the Bosch Sensor $52.99 at auto zone nightmare over......
Reply
Old Jul 16, 2005 | 06:48 PM
  #3  
stormin310's Avatar
stormin310
Thread Starter
Racer
10 Year Member
 
Joined: May 2005
Posts: 279
Likes: 0
From: houston texas
Default

Replace power antenna today also ended up taking 3 hours....lol cost $94 at guzman pontiac 2 miles from my house list for $176.13 but since they are ebay store printed ebay listing and they dropped the shipping......Good day..........My corvette shop wanted to replace both sensors drivers side for around $250 and charge $140 for antenna and $80 labor to install so 140+80=220 and the $250 makes $470 total for both cost me around $156 not the money just the point of its not all that hard to do......2nd time hopefuly never would take much less time.........
Reply

Get notified of new replies

To How do you disconnect O2 sensor connector





All times are GMT -4. The time now is 04:03 PM.