PCV Catch can
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,911
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
PCV Catch can
Anyone using a home made, HomeDepot or other type of PCV filter/Catch can????
I want to install one but not sure where to put it. I was going to install it on the passenger side between the passenger side head the TB. ??? thoughts.. Just wanted to be sure
thanks
robert
I want to install one but not sure where to put it. I was going to install it on the passenger side between the passenger side head the TB. ??? thoughts.. Just wanted to be sure
thanks
robert
Team Owner
Joined: May 2001
Posts: 36,175
Likes: 2,511
From: ...tearing up the highways, one state at a time™®©
Originally Posted by Bluewasp
Anyone using a home made, HomeDepot or other type of PCV filter/Catch can????
I want to install one but not sure where to put it. I was going to install it on the passenger side between the passenger side head the TB. ??? thoughts.. Just wanted to be sure
thanks
robert
I want to install one but not sure where to put it. I was going to install it on the passenger side between the passenger side head the TB. ??? thoughts.. Just wanted to be sure
thanks
robert
I have one on one of my cars Robert
It will probably be coming off soon, as I am not that crazy about it - I think it is by Jaz...
Wanna trade some cat's for it??
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,911
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
Originally Posted by RichS
On the C5 you put it inline of the PCV valve to catch any oil vapor. I have one ours, and thought about putting one on the GS.
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,911
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
Originally Posted by pwrful c4
Sorry I dont know what this is,please post a picture. 
Thread Starter
Race Director
Joined: Feb 2001
Posts: 13,911
Likes: 101
From: Manassas VA
NoVa Events Coordinator
St. Jude Donor '14
Originally Posted by *89x2*
I have one on one of my cars Robert
It will probably be coming off soon, as I am not that crazy about it - I think it is by Jaz...
Wanna trade some cat's for it??
It will probably be coming off soon, as I am not that crazy about it - I think it is by Jaz...
Wanna trade some cat's for it??
Team Owner
Joined: May 2001
Posts: 36,175
Likes: 2,511
From: ...tearing up the highways, one state at a time™®©
Originally Posted by Bluewasp
PCV can and $$$, sure.
Mine is on the pass. side behind the fogloght assy. and the valve coveres were reversed to allow for the hose to go off it...
50 bucks and all of the can/assy. for the cats
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Mar 2001
Posts: 699
Likes: 0
From: Camp Hill PA
Originally Posted by *89x2*
Wanna trade some cat's for it??
Melting Slicks
Joined: Dec 2000
Posts: 2,719
Likes: 60
From: Fremont Oh
All
Contact Greg @ blowerworks, he is a sponsor in the FI section...
He has a VERY nice Pcv valve and catch canthat actually works ( it is a CNC'd unit that can be pulled apart and cleaned and will go 100% closed) as well as a system to catch the oil it connects between the two valve covers and vents (on the supercharged cars) behind the airfilter. But could be easily adapted to fit in the original fitting on the throttle body. (It is moved on the supercharger cars to make sure it is always seeing vacuum.
I just bought one for my 96 LT1...
It is a very clean setup, and rests back towards the firewall.
call Greg @ Blowerworks (201) 891-4690
i hope this helps!
Mo
Contact Greg @ blowerworks, he is a sponsor in the FI section...
He has a VERY nice Pcv valve and catch canthat actually works ( it is a CNC'd unit that can be pulled apart and cleaned and will go 100% closed) as well as a system to catch the oil it connects between the two valve covers and vents (on the supercharged cars) behind the airfilter. But could be easily adapted to fit in the original fitting on the throttle body. (It is moved on the supercharger cars to make sure it is always seeing vacuum.
I just bought one for my 96 LT1...
It is a very clean setup, and rests back towards the firewall.
call Greg @ Blowerworks (201) 891-4690
i hope this helps!
Mo
