O2 Program Out with LT1 Edit
Aug 16, 2005 | 07:26 PM
Thread Starter
Racer
Joined: Apr 2003
Posts: 296
Likes: 0
From: Houston Texas
O2 Program Out with LT1 Edit
Hey guys,
Anyone use LT1 edit to program out your rear O2 sensors?
I found the screen, however, the procedure is not clear.
1996 LT1
Thanks,
Nick
Aug 17, 2005 | 12:52 AM
Melting Slicks
Joined: Dec 1999
Posts: 2,816
Likes: 2
From: Austin, TX
On mine, I just disabled SES for all hardware verification parameters for the #2 sensors (both banks). Seems to be working fine.
Aug 17, 2005 | 02:26 AM
Thread Starter
Racer
Joined: Apr 2003
Posts: 296
Likes: 0
From: Houston Texas
Ok,
So for all rear O2 diagnostic tests T-Side and E-Side = no. For all rear O2, regarding SES, all set to off.
I'll flash it after I get my flywheel back and have reassembled the car
. Should be on Fri. or Sat. I'll post the skinny after I open it up a bit.
Thanks,
Nick