10 Day Cross-frame sell!!!!!!!!!
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
10 Day Camber-brace/Cross-frame sell!!!!!!!!!
I know the price of gas has really taking a junk out of everyone's mod money, including mine. So to help everyone out and to help keep R-D Racing in business, we are having a 10-day sell on Cross-frames. The sell starts today and ends on 9/18/05. Please order early as orders will be filled as received. There will be a 2 week lead time for orders placed during the sell and this could change depending on the number of orders, so call early to get on top of the list.
The sell price for the Camber-brace is $175.00 with free shipping to the lower 48.
The sell price for the Cross-frame is $360.00 with free shipping to the lower 48.
Please call or email for international shipping cost.
Thanks,
Dave
The sell price for the Camber-brace is $175.00 with free shipping to the lower 48.
The sell price for the Cross-frame is $360.00 with free shipping to the lower 48.
Please call or email for international shipping cost.
Thanks,
Dave
Last edited by 4GTWRK; Sep 9, 2005 at 09:11 AM.
Race Director
Joined: May 2003
Posts: 10,749
Likes: 41
Originally Posted by R-D Racing
I know the price of gas has really taking a junk out of everyone's mod money, including mine. So to help everyone out and to help keep R-D Racing in business, we are having a 10-day sell on Cross-frames. The sell starts today and ends on 9/18/05. Please order early as orders will be filled as received. There will be a 2 week lead time for orders placed during the sell and this could change depending on the number of orders, so call early to get on top of the list.
The sell price is $360.00 with free shipping to the lower 48. Please call or email for international shipping cost.
Thanks,
Dave
The sell price is $360.00 with free shipping to the lower 48. Please call or email for international shipping cost.
Thanks,
Dave
yeah the gas thing does hurt.
Pro
Joined: Feb 2004
Posts: 641
Likes: 16
From: O'Fallon MO
This is a great deal. I've got all of Dave's chassis bracing on my 91 Z-07, Camber Brace, Cross Frame (solid welded X section version) and S/T Frame. I you can find a stiffer C-4, buy it. My Vette handles great.
Race Director
Joined: Dec 1999
Posts: 11,182
Likes: 2
From: Almost all Skyline Cruises Vettes at Waterside 1-5
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by R-D Racing
I know the price of gas has really taking a junk out of everyone's mod money, including mine. So to help everyone out and to help keep R-D Racing in business, we are having a 10-day sell on Cross-frames. The sell starts today and ends on 9/18/05. Please order early as orders will be filled as received. There will be a 2 week lead time for orders placed during the sell and this could change depending on the number of orders, so call early to get on top of the list.
The sell price for the Camber-brace is $175.00 with free shipping to the lower 48.
The sell price for the Cross-frame is $360.00 with free shipping to the lower 48.
Please call or email for international shipping cost.
Thanks,
Dave
The sell price for the Camber-brace is $175.00 with free shipping to the lower 48.
The sell price for the Cross-frame is $360.00 with free shipping to the lower 48.
Please call or email for international shipping cost.
Thanks,
Dave
I have an 88 vert and i have butchered my cross frame members over speed bunps, etc
Will your frames bolt into a roadster without modifications? Are they lower or higher with respect to road clearance than the stock cross frames?
thanks
Jack
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
I experienced a real side benefit of installing the Cross Frame that I wasn't expecting. After engine modifications, I was having major problems getting any forward traction on street tires. The rigidity added by the Cross Frame not only increased traction on initial take-off but also nearly completely eliminated the fishtailing that often occurred when the A4 shifted into second at WOT, which at times would get the car out of shape to a dangerous degree.
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by jackdaroofer
Hey Dave
I have an 88 vert and i have butchered my cross frame members over speed bunps, etc
Will your frames bolt into a roadster without modifications? Are they lower or higher with respect to road clearance than the stock cross frames?
thanks
Jack
I have an 88 vert and i have butchered my cross frame members over speed bunps, etc
Will your frames bolt into a roadster without modifications? Are they lower or higher with respect to road clearance than the stock cross frames?
thanks
Jack
We have several customers that have updated their vert frame with the Cross-frame. You do have to install our nut serts for the rear mounting points, but they do not take away the stock mounting points, so you could go back to stock someday. You will gain a little clearance with the Cross-frame.
Dave
Race Director
Joined: Dec 1999
Posts: 11,182
Likes: 2
From: Almost all Skyline Cruises Vettes at Waterside 1-5
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by R-D Racing
We have several customers that have updated their vert frame with the Cross-frame. You do have to install our nut serts for the rear mounting points, but they do not take away the stock mounting points, so you could go back to stock someday. You will gain a little clearance with the Cross-frame.
Dave
Dave
Does that mean I might have to drill holes and stuff?Thanks
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by jackdaroofer
Does that mean I might have to drill holes and stuff?Thanks
Dave
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by KNCRSR5R
Dave....
Are these the only products you have discounted at this point?
Are these the only products you have discounted at this point?
Thanks,
Dave
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,801
Likes: 2
From: Amarillo TX
Originally Posted by LT1CORVETTE
How difficult is it to install the camber brace on a 96 z51 lt1? Does it involve drilling, jacking up the car, special tools, removal of parts?
Drop me an email and I will send you a copy of the instructions.
Thanks,
Dave
