PKE programming-94 LT1
Pro
Joined: Jan 2004
Posts: 653
Likes: 0
From: Northern New Jersey
St. Jude Donor '03-'05-'06-'07-'08
1. Move all Xmitters out of range
2. Turn ignition key on
3. Push trip odo button twice
4.Within 5 seconds , press and hold the FUEL INFO button until
the PKE light comes on and stays on.
5. Turn ignition key to off but leave key in the ignition.
The pke light should flash once per second.
6. Bring transmitter(FOB) into range
The PKE light should come on and stay on.
7. Move the xmitter out of range and turn off key.
PKE should be programmed.
2. Turn ignition key on
3. Push trip odo button twice
4.Within 5 seconds , press and hold the FUEL INFO button until
the PKE light comes on and stays on.
5. Turn ignition key to off but leave key in the ignition.
The pke light should flash once per second.
6. Bring transmitter(FOB) into range
The PKE light should come on and stay on.
7. Move the xmitter out of range and turn off key.
PKE should be programmed.
