Squeaky poly bushings?????
Race Director
Joined: Aug 2000
Posts: 14,130
Likes: 7
Cruise-In II Veteran
Use marine grease.Smother the bushings with them.You will need to take the parts/bushings out to do it again.Marine grease is waterproof so wear latex gloves when applying it.The one I bought was a tube from the auto parts store and it was a green colored grease.It may be meant for a grease gun but I didnt use it that way.Just popped the cap off and scooped it out.That sticky white stuff you get with the kits arent worth a damn.
Good Luck!
Good Luck!
Racer
Joined: Oct 2005
Posts: 264
Likes: 1
From: La Grande Oregon
Ok at 71,000 miles i'm thinking about new poly bushings as well, the last set i put in my 4x4 sqweak. I dont want any noises coming from my 86 coupe, does anybody make some a set that doesn't sing a soulful tune while you go down the road? joe
Race Director
Joined: Jan 2005
Posts: 10,641
Likes: 13
From: Slidell Louisiana
Originally Posted by bluealtered
Ok at 71,000 miles i'm thinking about new poly bushings as well, the last set i put in my 4x4 sqweak. I dont want any noises coming from my 86 coupe, does anybody make some a set that doesn't sing a soulful tune while you go down the road? joe
Mike
