fuel pressure gauge
Thread Starter
Drifting
Joined: May 2005
Posts: 1,258
Likes: 38
From: springtown Texas
fuel pressure gauge
been thinking about mounting a fuel pressure gauge in the cockpit permanently. it would have to have an isolater to keep the fuel out of the cockpit.
does anyone have a fuel pressure gauge mounted inside their vette and where do you have it mounted. would love to see some pics of where you have it mounted.
also, who sells a fuel pressure gauge kit that screws on to the schrader valve with an isolater... anyone have a link to one.
does anyone have a fuel pressure gauge mounted inside their vette and where do you have it mounted. would love to see some pics of where you have it mounted.
also, who sells a fuel pressure gauge kit that screws on to the schrader valve with an isolater... anyone have a link to one.
Melting Slicks
Joined: Dec 2000
Posts: 2,719
Likes: 60
From: Fremont Oh
You can get your isolator and the guage from Autometer through Summit.... the isolator comes with an AN 4 fitting that will screw onto the schrader valve, ( make sure you pull out the core first 
I have mine mounted on a dual a pillar pod... isolated was like 85 dollars, gauge about another 85, and the pillar pod about 45...
I recently switched to an electric version , look in my projects on my website ( in my signature) ..
Hope this helps feel free to email or PM if you need more information...
MO
I have mine mounted on a dual a pillar pod... isolated was like 85 dollars, gauge about another 85, and the pillar pod about 45... I recently switched to an electric version , look in my projects on my website ( in my signature) ..
Hope this helps feel free to email or PM if you need more information...
MO
Pro
Joined: Nov 2004
Posts: 641
Likes: 3
From: Long Island NY
http://forums.corvetteforum.com/show....php?t=1230003
Fuel rail mounted: Accel, B&M, Street and Performance.
Street and Performance has the nicest I think. http://www.hotrodlane.cc/
Fuel rail mounted: Accel, B&M, Street and Performance.
Street and Performance has the nicest I think. http://www.hotrodlane.cc/
Last edited by artvette; Nov 26, 2005 at 12:15 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Le Mans Master
Joined: Jan 2002
Posts: 9,036
Likes: 13
From: Edmonton AB
From a post of mine a while ago at the bottom of this
thread
thread
Originally Posted by Slalom4me
Stewart-Warner offers electric fuel pressure guages in 0-16 and 0-100 PSI.
They used to have several different 2-1/16" dia styles but I believe
some of the 0-16 PSI models have been dropped. Since my catalog
is from '98, hopefully the 0-100 selection has been expanded.
** == 0-100 PSI Fuel (requires 82893 sender) ================ **
83042 White bezel/White face/Black numbers and needle - Seaworthy (Swthy)
(there are also the 83043 to 83047 pn#'s with other somewhat funky
colour combo's)
** == 0-16 PSI Fuel (requires 82504-F sender) ================ **
82888-P Stainless bezel/Black face/ White numbers and Orange needle - Track Force (TF)
I have this guage in an old-school BB car.
82868-P Black bezel/Black face/ White numbers and Orange needle - Track Force (TF)
82333 Stainless bezel/Black face/ White numbers and White needle - Deluxe (Dlx)
A classic SW look, I wanted this but couldn't get it.
284AM Black bezel/Black face/ White numbers and White needle - Heavy Duty (HD)
83067 White bezel/White face/Black numbers and needle - Seaworthy (Swthy)
(there are also the 83068 to 83072 pn#'s with other somewhat funky
colour combo's)
They used to have several different 2-1/16" dia styles but I believe
some of the 0-16 PSI models have been dropped. Since my catalog
is from '98, hopefully the 0-100 selection has been expanded.
** == 0-100 PSI Fuel (requires 82893 sender) ================ **
83042 White bezel/White face/Black numbers and needle - Seaworthy (Swthy)
(there are also the 83043 to 83047 pn#'s with other somewhat funky
colour combo's)
** == 0-16 PSI Fuel (requires 82504-F sender) ================ **
82888-P Stainless bezel/Black face/ White numbers and Orange needle - Track Force (TF)
I have this guage in an old-school BB car.
82868-P Black bezel/Black face/ White numbers and Orange needle - Track Force (TF)
82333 Stainless bezel/Black face/ White numbers and White needle - Deluxe (Dlx)
A classic SW look, I wanted this but couldn't get it.
284AM Black bezel/Black face/ White numbers and White needle - Heavy Duty (HD)
83067 White bezel/White face/Black numbers and needle - Seaworthy (Swthy)
(there are also the 83068 to 83072 pn#'s with other somewhat funky
colour combo's)
Thread Starter
Drifting
Joined: May 2005
Posts: 1,258
Likes: 38
From: springtown Texas
yes after looking in my summit cat at diff gauges i did decide to go electric i just hope they are accurate.i decided to get the amber digital fuel pressure and air/fuel.
the amber will match the factory gauges and my amber shift light
i also orderd a fuel safty switch for my nos
Le Mans Master
Joined: Sep 2004
Posts: 6,019
Likes: 567
From: Conroe Texas
Originally Posted by Var
Why dont you run one with an electronic sending unit so you dont have to run fuel lines into the cabin?
nhra does'nt like non-electric fuel pressure gauges in the cockpit
Pro
Joined: Jan 2005
Posts: 579
Likes: 0
From: Denton Texas
Whats the price?
Originally Posted by GS977
yes after looking in my summit cat at diff gauges i did decide to go electric i just hope they are accurate.i decided to get the amber digital fuel pressure and air/fuel.
the amber will match the factory gauges and my amber shift light
i also orderd a fuel safty switch for my nos
What was the price & part #'s from summit?
Thread Starter
Drifting
Joined: May 2005
Posts: 1,258
Likes: 38
From: springtown Texas
here ya go
Part # Item Price Qty Line Total Delete
--------------------------------------------------------------------------------
ATM-10190 Gauge Pod, Dual 2 1/16 in., Black ABS, Chevy Corvette, Each $27.95 $27.95
NOS-15685NOS Fuel Pressure Safety Switch, Adjustable, 25-50 psi, 1/8 in. NPT, Each $36.39 $36.39
NRD-M8034A Gauge, Street Series, Digital, Fuel Pressure, Black Face, 0-100 psi, 2 1/16 in. Diameter, Electrical, Each $59.88 $59.88
NRD-M9200-AB Gauge, Street Series, Digital, Air/Fuel Ratio, Black Face, 0-1 V, 2 1/16 in. Diameter, Electrical, Each $59.88 $59.88
NRD-S8434 Sending Unit, Fuel Pressure, Each $59.95 $59.95
NRD-S8942 Sending Unit, O2 Sensor, Air/Fuel Ratio, Kit $79.99 $79.99
Select All
If you have deleted any items from your cart or changed any quantities, please press the update button. Sub Total: $324.04
Part # Item Price Qty Line Total Delete
--------------------------------------------------------------------------------
ATM-10190 Gauge Pod, Dual 2 1/16 in., Black ABS, Chevy Corvette, Each $27.95 $27.95
NOS-15685NOS Fuel Pressure Safety Switch, Adjustable, 25-50 psi, 1/8 in. NPT, Each $36.39 $36.39
NRD-M8034A Gauge, Street Series, Digital, Fuel Pressure, Black Face, 0-100 psi, 2 1/16 in. Diameter, Electrical, Each $59.88 $59.88
NRD-M9200-AB Gauge, Street Series, Digital, Air/Fuel Ratio, Black Face, 0-1 V, 2 1/16 in. Diameter, Electrical, Each $59.88 $59.88
NRD-S8434 Sending Unit, Fuel Pressure, Each $59.95 $59.95
NRD-S8942 Sending Unit, O2 Sensor, Air/Fuel Ratio, Kit $79.99 $79.99
Select All
If you have deleted any items from your cart or changed any quantities, please press the update button. Sub Total: $324.04
4th Gear
Joined: Sep 2005
Posts: 4
Likes: 0
From: Scottsdale AZ
Originally Posted by Mo_Bandy
You can get your isolator and the guage from Autometer through Summit.... the isolator comes with an AN 4 fitting that will screw onto the schrader valve, ( make sure you pull out the core first I have mine mounted on a dual a pillar pod... isolated was like 85 dollars, gauge about another 85, and the pillar pod about 45...
I recently switched to an electric version , look in my projects on my website ( in my signature) ..
Hope this helps feel free to email or PM if you need more information...
MO
I have mine mounted on a dual a pillar pod... isolated was like 85 dollars, gauge about another 85, and the pillar pod about 45... I recently switched to an electric version , look in my projects on my website ( in my signature) ..
Hope this helps feel free to email or PM if you need more information...
MO
Interested in doing the gauges myself, what's the URL for your web site?
Jumpinjackflash
