Am I asking for trouble?
Thread Starter
Pro
Joined: Feb 2002
Posts: 565
Likes: 2
From: Chandler AZ
Am I asking for trouble?
Will I risk spring damage if I go with 1.6 Crane roller rockers on my 94 LT-1 with 217,000 miles? I believe stock is 1.5 and I didn't know if the 1.6 would stress the springs. Thanks for the input, Robert
Drifting
Joined: May 2003
Posts: 1,979
Likes: 48
From: Lakeport CA
I ran them on my L98 for about 5 years before a minor ring/valve job. stock springs were toast & so were stock guide plates at rebuild time. Otherwise... I had 5 years of more fun/power & doubt wear had THAT much to do w/ the rockers.
Think of it as a little step forward for when you do the real rebuild. You won't have to buy the rockers then, already have em & re-install.
Just my $.02 & perspective on performance parts...
Think of it as a little step forward for when you do the real rebuild. You won't have to buy the rockers then, already have em & re-install.
Just my $.02 & perspective on performance parts...
