1990 corvette wiring harness
Thread Starter
Navigator
Joined: May 2006
Posts: 9
Likes: 0
1990 corvette wiring harness
hey guys i've been trying to get help with this in the audio forum, but have gotten no response. please, the faq does not really tell me about this and i'm confused, i need to get this stereo working.
my 90' vette has the bose speakers that i've removed
can somebody give me a link of a wiring harness that will plug into my 90' vette bose to the new aftermarket pioneer unit? please. the faq is unclear on this.
my 90' vette has the bose speakers that i've removed
can somebody give me a link of a wiring harness that will plug into my 90' vette bose to the new aftermarket pioneer unit? please. the faq is unclear on this.
Last edited by ajorda14; Jun 6, 2006 at 10:04 PM.
Intermediate
Joined: Apr 2006
Posts: 45
Likes: 0
the problem isn't what wires it's where to plug in. The Bose is a two part radio. The part that you can get a pre made plug for lives under-neath the pass dash or some other hidden part of the car.
Given that waited till 1 of 4 speakers was left, no CD, no tape, and no Radio (Antenna failure), I replace the entire thing. (remove interior to make life easier). So All I needed was the dimmer line, light, and ignition on. I ran a new high watt 12V+ and a new ground.
Given that waited till 1 of 4 speakers was left, no CD, no tape, and no Radio (Antenna failure), I replace the entire thing. (remove interior to make life easier). So All I needed was the dimmer line, light, and ignition on. I ran a new high watt 12V+ and a new ground.
