SGI 5-C speed calibrator help

Reply Subscribe

Thread Tools

Search this Thread

Jul 16, 2006 | 09:05 AM

chillcat

Thread Starter

Drifting

Joined: Apr 2004

Posts: 1,453

Likes: 0

From: crystalriver Florida

SGI 5-C speed calibrator help

I posted a thread awhile back on wiring up this small unit for the speedogear correction on my keisler 5speed. To start off with, I've called keisler several times for help and they could NOT help me, I'm looking for some help ONLY from someone who has this same model installed too, I have an 85 vette. Still looking to copy someones exact setup. Heres how this unit is setup: http://www.dakotadigital.com/cartimages/prd_zm_126.jpg

----------
POWER
GROUND
SENSOR GROUND
INPUT
OUTPUT 1 Not sure which output to use
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5

1 on/off Not sure which options to leave on/off
2 on/off
3 on/off
4 on/off

Jul 17, 2006 | 07:27 PM

chillcat

Thread Starter

Drifting

Joined: Apr 2004

Posts: 1,453

Likes: 0

From: crystalriver Florida

Still need help from someone with this same unit in there car...

Last edited by chillcat; Jul 18, 2006 at 07:39 PM.

Jul 18, 2006 | 07:39 PM

chillcat

Thread Starter

Drifting

Joined: Apr 2004

Posts: 1,453

Likes: 0

From: crystalriver Florida

bump

Jul 18, 2006 | 07:50 PM

CFI-EFI

Race Director

Joined: Sep 2000

Posts: 17,298

Likes: 33

From: The Top of Utah

Why are you fooling with that expensive electronic black box? Don't they sell speedo gears for that trans?

RACE ON!!!

Jul 18, 2006 | 07:57 PM

chillcat

Thread Starter

Drifting

Joined: Apr 2004

Posts: 1,453

Likes: 0

From: crystalriver Florida

I'm not sure, I'm pretty sure everyone who has a kiesler tranny HAVE to put this unit in inorder to get the right mph.

Jul 18, 2006 | 08:03 PM

toptechx6

Safety Car

Joined: Jun 2006

Posts: 3,629

Likes: 28

From: FL

Try this site

http://www.dakotadigital.com/index.c...d=255&mode=cat

Jul 18, 2006 | 08:21 PM

chillcat

Thread Starter

Drifting

Joined: Apr 2004

Posts: 1,453

Likes: 0

From: crystalriver Florida

forgot to mention in my original thread above that dakota digital could NOT help me either, They don't keep files of cars and what settings they require on there calibrators...I'm ONLY asking if someone wouldn't mind checking there unit and letting me know how he/she has there settings set up to...hope to hear from someone who has this same unit only, thanks