My Dyno Pulls
Thread Starter
Advanced
Joined: Jun 2004
Posts: 61
Likes: 0
Thread Starter
Advanced
Joined: Jun 2004
Posts: 61
Likes: 0
The pulls were made with a mail order tune from my old motor setup. Allen could not tune the car because the O2 sensor milivolts were low and the car was missing real bad. It made 502 without the alcohol injection and no new tune.
I'm going back when I get the bugs worked out.
I'm going back when I get the bugs worked out.
Instructor
Joined: Jul 2006
Posts: 249
Likes: 0
Originally Posted by 95PCTBK
The pulls were made with a mail order tune from my old motor setup. Allen could not tune the car because the O2 sensor milivolts were low and the car was missing real bad. It made 502 without the alcohol injection and no new tune.
I'm going back when I get the bugs worked out.
I'm going back when I get the bugs worked out.
Thread Starter
Advanced
Joined: Jun 2004
Posts: 61
Likes: 0
it has a t-trim blower with the ati intercooler, greg carroll alky kit. the motor is a 383 with afr heads and comp cam. the car fouls the plugs and pops realy bad. it had a burnt o2 pig tail on the right side. i hope it will make more boost when i figure out the problems and get back to the dyno.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Advanced
Joined: Jun 2004
Posts: 61
Likes: 0
