Tunercat
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 3,385
Likes: 4
From: King George VA
Tunercat
If I get the tunercat software, what do I have to get to make it work with a 96 LT1. Do I need the WinFlash?
Where so I get the cable? Can I make from Radioshack stuff and what not?
Where so I get the cable? Can I make from Radioshack stuff and what not?
Le Mans Master
Joined: May 2005
Posts: 5,214
Likes: 65
From: Queensland, AUSTRALIA
Have a look at this thread here for cable making process and diagrams, but i dont know if it will work on a 96, they are OBD2.
http://forums.corvetteforum.com/show....php?t=1381422
So also have a look here:http://www.obd2allinone.com/
No you dont need winflash with Tuner Cat. BUT you have to make sure you have the right version of Tuner Cat and i havent seen one for a 96 yet.
http://forums.corvetteforum.com/show....php?t=1381422
So also have a look here:http://www.obd2allinone.com/
No you dont need winflash with Tuner Cat. BUT you have to make sure you have the right version of Tuner Cat and i havent seen one for a 96 yet.
Safety Car
Joined: Apr 2003
Posts: 3,793
Likes: 9
From: VA
Originally Posted by fc_soldier
If I get the tunercat software, what do I have to get to make it work with a 96 LT1. Do I need the WinFlash?
Where so I get the cable? Can I make from Radioshack stuff and what not?
Where so I get the cable? Can I make from Radioshack stuff and what not?
He had OBD2 software but sold it to Jet.
Start here:
http://forums.corvetteforum.com/showthread.php?t=202488
Race Director
Joined: Jan 2002
Posts: 12,264
Likes: 88
From: O'Fallon Missouri
Originally Posted by Vis Croceus
To make tunercat work with a 96 you would need a new ECM.
He had OBD2 software but sold it to Jet.
Start here:
http://forums.corvetteforum.com/showthread.php?t=202488
He had OBD2 software but sold it to Jet.
Start here:
http://forums.corvetteforum.com/showthread.php?t=202488
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 3,385
Likes: 4
From: King George VA
Originally Posted by Vis Croceus
To make tunercat work with a 96 you would need a new ECM.
He had OBD2 software but sold it to Jet.
Start here:
http://forums.corvetteforum.com/showthread.php?t=202488
He had OBD2 software but sold it to Jet.
Start here:
http://forums.corvetteforum.com/showthread.php?t=202488
Alot of us look for clarity on the 96 issue.
THX
Safety Car
Joined: Apr 2003
Posts: 3,793
Likes: 9
From: VA
Originally Posted by fc_soldier
That forum is to crazy and all over the place to make sense of a 96 corvette ecm. All it talks about is every year but 96 basically.
Alot of us look for clarity on the 96 issue.
THX
Alot of us look for clarity on the 96 issue.
THX
There is plenty of easily-found information on the net for tuning these cars, all you have to do is search and read. If you can't be bothered to even wade through the FAQ, you aren't going to be very successful with tuning.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 3,385
Likes: 4
From: King George VA
Originally Posted by Vis Croceus
There is plenty of easily-found information on the net for tuning these cars, all you have to do is search and read. If you can't be bothered to even wade through the FAQ, you aren't going to be very successful with tuning.
95 stopped the standard burning process then 97 they got the LS1s so 96 is stuck in the middle.
Im new to the game I was hoping some could say I found a site the really helps. The forum stated is useless to a 96. Im willing ready but all I find is the same stuff everyone else is saying.
Race Director
Joined: Jan 2002
Posts: 12,264
Likes: 88
From: O'Fallon Missouri
Originally Posted by fc_soldier
95 stopped the standard burning process then 97 they got the LS1s so 96 is stuck in the middle.
http://carputing.tripod.com/9697lt1edit.htm
Last edited by STL94LT1; Oct 14, 2006 at 07:18 PM.
Safety Car
Joined: Apr 2003
Posts: 3,793
Likes: 9
From: VA
Originally Posted by fc_soldier
If you try looking for it you hit tons of dead ends! Ive been searching for a couple of days now but 96 seems to be the exception year
95 stopped the standard burning process then 97 they got the LS1s so 96 is stuck in the middle.
95 stopped the standard burning process then 97 they got the LS1s so 96 is stuck in the middle.
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 3,385
Likes: 4
From: King George VA
Well as for the corvettes they stopped the lt1 in 1996 right? And fbody continued it til 1997. But I can use the programmers for a fbody on a corvette? Why would they be seperate if they are the same thing? 
Le Mans Master
Joined: May 2005
Posts: 5,214
Likes: 65
From: Queensland, AUSTRALIA
Use LT1edit for the OBD2 cars. Im not sure if you can simply take the 96 ECM out and whack in a 95 ECM, but if you can do that, then you could use the $EE definition with Tuner Cat and use a regular 2 transistor type ALDL cable. Id imagine it would all work, but then again it may not. Someone will know.
