Halo Panels
Thread Starter
Instructor
Joined: Apr 2006
Posts: 125
Likes: 0
From: Portland OR
Halo Panels
I have a broken bolt hole on my RH halo panel for my 90 Zr1. So, I went and got a replacement, it came out of a 96. From what I've seen it looks like 84-96 are interchangeable, but now that I have the piece, it says 91-96 are different. Is this so? I can see that the hole for the seat belt is in a different spot, but can I move the seat belt down a little? I don't want to tear the car apart just to get even more irritated. Any info would help.
Melting Slicks
Joined: Aug 1999
Posts: 2,240
Likes: 42
From: Baltimore, MD USA
Some time during the 90 model year, the pillar bolt position for the seat belt was changed.
84-early 90 halo panels and late 90-96 panels.
If you look at the back side of the late model halo panels (the ones you purchased) it should show the outline of where the old bolt holes for the 84-early 90 model would have been drilled.
84-early 90 halo panels and late 90-96 panels.
If you look at the back side of the late model halo panels (the ones you purchased) it should show the outline of where the old bolt holes for the 84-early 90 model would have been drilled.
