Superram & Nitrous
Thread Starter
Instructor
Joined: Aug 2003
Posts: 172
Likes: 0
Superram & Nitrous
I'd like to apply nitrous to my S'Ram setup. However, reliable sources warn re. use of the usual plenum entrance arrangement (poor distribution=lean rear cyls. !) Anybody conquer this problem without going to individual nozzles in the runners? (expensive, since I already have the 150 hp. shot kit) If not, rather than dis-assemble the S'Ram,ugh, would it be feasible to plumb the nozzles into the plenum(aimed at the runner openings) as opposed to mounting the nozzles on the runners?
Thanks, Bigjack
Thanks, Bigjack
