Any know anything about the Multiport intake?
Thread Starter
Melting Slicks
Joined: Aug 2000
Posts: 2,388
Likes: 42
From: Murrysville PA
Anyone know anything about the Multiport intake?
Street and Performance sells an intake called the Multiport that has a straight 7" runner. It looks like the plenum is make from a TPI plenum. They also make one for Vortec heads called the ramport that they say fits under the stock C4 hood. I cannot find any past mentions of this intake on the forum.
Last edited by 89vette; Dec 7, 2006 at 10:15 PM.
Le Mans Master
Joined: Mar 2000
Posts: 8,950
Likes: 4
From: Lafayette LA
Le Mans Master
Joined: Jan 2002
Posts: 9,036
Likes: 13
From: Edmonton AB
Originally Posted by 89vette
You have to download the catalog and look at page 59 towards the bottom.
the Catalog - covers pgs 53-61. This downloads in a couple of
minutes, the entire catalog takes a LOT longer.
Right-click the link below and then select 'Save As'
SBC Fuel Injection Units & Accessories
Looking at the images on pg 59, it appears that the unit shown
has the optional 2-1/4" and 1-3/4" riser blocks installed between
the manifold and the plenum.
I do not see any comments about it fitting under a stock C4 hood.
Someone would have to convince me that the unit as shown would
do so. Now, if the riser blocks come out, that could be a different
story.
Is there any news about whether the intake is available by itself or
only as a package deal?
.
Drifting
Joined: Oct 2006
Posts: 1,554
Likes: 13
From: Romeoville IL
Looking at the images on pg 59, it appears that the unit shown
has the optional 2-1/4" and 1-3/4" riser blocks installed between
the manifold and the plenum.
I do not see any comments about it fitting under a stock C4 hood.
Someone would have to convince me that the unit as shown would
do so. Now, if the riser blocks come out, that could be a different
story.
Is there any news about whether the intake is available by itself or
only as a package deal?
has the optional 2-1/4" and 1-3/4" riser blocks installed between
the manifold and the plenum.
I do not see any comments about it fitting under a stock C4 hood.
Someone would have to convince me that the unit as shown would
do so. Now, if the riser blocks come out, that could be a different
story.
Is there any news about whether the intake is available by itself or
only as a package deal?
Looks like it could be the same manifold to me, and that it fits under the hood.
Picture is under the hood of the Callaway Sledgehammer.
Melting Slicks
Joined: Aug 2003
Posts: 3,409
Likes: 400
From: Lakeville MI
It kinda looks like a dual quad or tunnel ram style intake base with a tpi style plenum merged on top along with injector plumbing. Not a bad idea.
Too bad Holley didn't go this route with the Stealth Ram. Protected by patents maybe?
Too bad Holley didn't go this route with the Stealth Ram. Protected by patents maybe?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Drifting
Joined: Oct 2006
Posts: 1,554
Likes: 13
From: Romeoville IL
Here's a picture from the catalog, with the optional risers... a bit small and gets fuzzy if you try to enlarge.
