Paging Ed Wright or another custom chip burner....
Thread Starter
Burning Brakes
Joined: Apr 2000
Posts: 959
Likes: 1
From: Lemoore CA
Paging Ed Wright or another custom chip burner....
Anyone that will help me out here... Whether its me talking to Ed to see what his policies on buying a chip are, or its a forum member helping me through the work... I have another post going, but was trying to get opinions on who will make a chip that is close to perfect.... and is willing to work with revising it.... Thats my real concern, after this much work I want the thing RIGHT.
Paul
Paul
Le Mans Master
Joined: Oct 1999
Posts: 9,713
Likes: 3
From: Sachse Texas
Cruise-In I Veteran
Cruise-In II Veteran
Re: Paging Ed Wright or another custom chip burner.... (Nomar116)
Ed revised a chip for me 3 times in order to get it right, but it cost me the dyno time, mail costs, and I sent him the captured data from the car for him to go by.
Pro
Joined: Jun 2001
Posts: 697
Likes: 0
From: College Station Tx
Re: Paging Ed Wright or another custom chip burner.... (Nomar116)
If you want the chip close to perfect you are realistically going to need to take him the car.
If you spend alot of time, money, and effort data logging and exchanging info by mail you may or may not get close - it will depend on the quality of all of the above factors. I would highly recommend just taking your car to him for a dyno tune.
If you spend alot of time, money, and effort data logging and exchanging info by mail you may or may not get close - it will depend on the quality of all of the above factors. I would highly recommend just taking your car to him for a dyno tune.
Instructor
Joined: Aug 2000
Posts: 187
Likes: 0
From: Midwest City Oklahoma
Re: Paging Ed Wright or another custom chip burner.... (Nomar116)
Paul, since you are in Overland Park, Kansas why don't you just drive to Tulsa and have Ed Wright put the car on his dyno and fine tune it on the spot himself instead of mailing data. With your modifications I bet Ed could pull out your max power. Ed's shop very easy to get to as it is just 3 blocks off highway 75 (which connects I-44). Give Ed a call. Bill
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Re: Paging Ed Wright or another custom chip burner.... (Nomar116)
Do it yourself,
Check this post with someone who had Ed program the PCM/ECM
http://ubb.mfba.org/cgi-bin/ultimate...c&f=1&t=001413
Check this post with someone who had Ed program the PCM/ECM
http://ubb.mfba.org/cgi-bin/ultimate...c&f=1&t=001413
