Magnaflow vs. Flowmaster
Team Owner
Joined: Sep 2002
Posts: 22,209
Likes: 12
From: OBAMA IS HITLER
Heel & Toe
Joined: Apr 2007
Posts: 16
Likes: 0
From: SunPrairie WI
i got the flowmaster 50 series delta flows , i cut off the 2 1/4 inch inlets at the mufflers used a hole saw to cut it out to 3 inch bought some mandrel bends 3 inch cut and welded them on, the same way the 2 1/4 inch was on .then built a full 3 inch mandrel bent exhaust no cats ,no resonators ,and no drone at any rpm .it is loud at wot .and when i come home at night the wife can hear me coming from a block away ,the neighbors hate it but it sounds awsome.like a true muscle car .i like the magnaflows to they look better then the flowmasters .and i think the best exhaust for a c4 hands down is the b&b but very pricey .as far as horse power differences between all of them ,they all perform pretty much the same
Race Director
Joined: May 2003
Posts: 10,749
Likes: 41
Team Owner
Joined: Sep 2002
Posts: 22,209
Likes: 12
From: OBAMA IS HITLER
great! nice doing business with you. send me $277.50 CAD, I'll PM you my mailing address. Or if you need so save on postage you can Paypal it to me. But I prefer the feel hard currency especially in cases like this
oh, what was that about you being so excited about beating up on SR motors (that you deleted)?
oh, what was that about you being so excited about beating up on SR motors (that you deleted)?
Last edited by Red Tornado; May 1, 2007 at 11:47 AM.
Race Director
Joined: May 2003
Posts: 10,749
Likes: 41
No Prob. One more thing. What nut would you like to kick me in? My right or my left?
Team Owner
Joined: Sep 2002
Posts: 22,209
Likes: 12
From: OBAMA IS HITLER
oh, i would never do that. creating an injury would only lessen the joy of it all. no solace from inflicting pain here, you're needed in one piece so we can all continue the joy. its a big love-in!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Racer
Joined: Apr 2007
Posts: 477
Likes: 0
From: edmonton alberta
ya billy boat fit the best ,and look the best ,but they are expensive are they worth it ?for the hp no ,looks? not really if you got money to burn buy the billy boats ,but if your like most of us buy the corsa or borla exhaust ,john lingenfelter used to use them on the cars he built and he was the king of corvette performance (R.I.P) he only used corsa or borla thats it
Cruising
Joined: Apr 2007
Posts: 13
Likes: 0
From: New Hampshire
When you posted this I ordered MagnaFlow for my 94, Got them today and installed myself. Very easy, I have no car mech skills. Took me about an hour and a half. Didnt even have to jack up the car. Sounds and Looks great.
Instructor
Joined: Apr 2006
Posts: 108
Likes: 0
From: Green Cove Springs Florida
I had a set of Flowmaster 40's installed on my 95 Vette and the DRONE would drive you crazy at lower speeds.
My wife refused to ride in it until I had the stock mufflers welded back on. The actual sound was good though. Wasted $350 having them installed.
My wife refused to ride in it until I had the stock mufflers welded back on. The actual sound was good though. Wasted $350 having them installed.
