zf 6 speed conversion clutch
Thread Starter
Burning Brakes
Joined: Feb 2007
Posts: 903
Likes: 133
From: Kerrville, Texas
zf 6 speed conversion clutch
I am converting a 1988 4+3 corvette to a 1993 black tag zf 6-speed. Can anyone tell me which clutch to use? There seems to be some differences from 1989 to 1993. thanks
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
I recommend the RAM C4 conversion, call RAM.
Also, the 89-93-1/2 has a larger ID TOB, than the 94-96 TOB
IMHO, the PULL yupe clutch is to sensitive to stack up issues, so I pulled my 3rd problem PULL type and went to the RAM Conversion
Also, the 89-93-1/2 has a larger ID TOB, than the 94-96 TOB
IMHO, the PULL yupe clutch is to sensitive to stack up issues, so I pulled my 3rd problem PULL type and went to the RAM Conversion
Instructor
Joined: Dec 2005
Posts: 188
Likes: 0
From: Riverside CA
I have the RAMit a bit tricky to set-up but I am to understand that the Pusher (Ram) typy will hold up to a lot more power.
Mine is supposed to be good to 600+ CSHP. I am making about 570 now and there has been no detectable slipage.
the kit includes what you will need, and some fairly decent instructions.
Teck support is preaty helpfull as well.
Good Luck
BLWN BUX
