Help!!!
Thread Starter
Instructor
Joined: Jun 2004
Posts: 177
Likes: 0
From: Little Ferry NJ
Help!!!
I have been having issues with my car and can't scan it. I have a moates cable and tuner rt program. I have no idea what i'm doing wrong! I live in Bergen County NJ and would travel for help. Thanks in advance for any help.
Instructor
Joined: Feb 2006
Posts: 172
Likes: 0
From: Taylors SC
You'll also notice at the bottom of the page links to more defs. Try them also as you're sure to find the correct one.
Instructor
Joined: Feb 2006
Posts: 172
Likes: 0
From: Taylors SC
Since your car is an 88, if you click on the link, the 4th line down from the top will have the definition file(bin) and the ALDL definition file(xdf). You can download them either into the bin folder in RT, or on your desktop. After you do that, start Tunerpro RT. On the top click XDF then choose "Select XDF". Find where you pot the XDF from your download and select it then click open- it will then load. Next-click on Tools, then ALDL/DATALOGGING, then Setup. At the top left is where you can load the definition file you downloaded. Once done, hook up to car, turn key on and do not start. Then start your datalogging by hitting the connect button. Hope this works.
