TCC --> Brake Switch

Reply Subscribe

Thread Tools

Search this Thread

Jul 12, 2007 | 08:58 PM

Coconut

Thread Starter

Racer

Joined: Jan 2006

Posts: 288

Likes: 1

TCC --> Brake Switch

Does anyone have a pic & location of the Torque Converter Clutch to brake safety switch that connects to the transmission wires on a 1991 automatic Corvette? It is a failsafe switch that allows the TCC to disengage (in case of an electrical power failure) when the brake pedal is pressed.

Jul 13, 2007 | 02:18 PM

CFI-EFI

Race Director

Joined: Sep 2000

Posts: 17,298

Likes: 33

From: The Top of Utah

Quote:

Originally Posted by Coconut

The TCC disengages when the brake pedal switch is opened by stepping on the pedal. That disconnects the electrical power from the TCC solenoid, the same as there would be no power in the case of a electrical power failure. On MY car the switch is at the top of the brake pedal. It is a dual function switch in tandem with the cruise control interrupt. I'm sure this is covered in your FSM. Mine is.

RACE ON!!!

Jul 23, 2007 | 10:08 AM

Coconut

Thread Starter

Racer

Joined: Jan 2006

Posts: 288

Likes: 1

Confirmed

I thought it was on top of the brake pedal, but wanted to make sure. This confirms it. Thanks!

Reply Subscribe