Lube?
Thread Starter
Racer
Joined: Jul 2007
Posts: 275
Likes: 0
From: Clarksville TN
Lube?
What type of suspension and chassis lubricant is suggested for a 1984 corvette? If I change the type do I need to worry about what is already in there? There are so many new and improved lubes out there, just don’t want to cause damage.
Team Owner
Joined: May 2002
Posts: 24,337
Likes: 25
From: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
The only lube points are at the zerk fittings on some of the balljoints and tie rod ends. How many depends on year. You can't lube the bushings without disassembling them.
Any marine grade or synthetic grease should be fine for the balljoints. Get a tube and a grease gun. I also recommend some zerk fitting covers. These cover the fittings and keep them clean for next time you need to lube it.
Any marine grade or synthetic grease should be fine for the balljoints. Get a tube and a grease gun. I also recommend some zerk fitting covers. These cover the fittings and keep them clean for next time you need to lube it.
