RE: 1986 Bosch MAF Sensor reconditioning
Thread Starter
Pro
Joined: Nov 2006
Posts: 727
Likes: 0
From: Ocean City Maryland
RE: 1986 Bosch MAF Sensor reconditioning
Does anyone know where I can send a Bosch MAF to be fixed. This an expensive piece of hardware and I hate to let it go to waste. The previous owner of my car had his old one replaced for this Bosch (at a whopping $800.00 price) which happen to go bad about 6 months later, and I know by looking up the part number that this was at least a $700.00 part So what do I do?
Thanks to this forum I was able to get one a a decent price but this is just ridiculous, I might get a core price but thats not even close to what this part cost!! Any ideas out there?
Thanks in advance
Thanks to this forum I was able to get one a a decent price but this is just ridiculous, I might get a core price but thats not even close to what this part cost!! Any ideas out there?
Thanks in advance
Team Owner
Joined: May 2002
Posts: 24,337
Likes: 25
From: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
You take it to the autoparts store and get a core charge for it. That's all it's worth.
At least you didn't spend $800 on it. I have a used one in a box in the garage that probably works, I'll sell it to you for $795.
At least you didn't spend $800 on it. I have a used one in a box in the garage that probably works, I'll sell it to you for $795.
Le Mans Master
Joined: Feb 2000
Posts: 9,715
Likes: 27
From: Kempner Texas
Got mine off a wrecked 'F' body at my local wrecking yard for $50. That was over three years ago and it's still going strong.
Many 'F' body cars use the same MAF; they're not Vette specific.
Jake
Many 'F' body cars use the same MAF; they're not Vette specific.
Jake
