hub assembly question
Thread Starter
Advanced
Joined: Feb 2007
Posts: 95
Likes: 0
From: belmont maine
hub assembly question
Hi, my Service ASR/ABS light has been going on. Mechanic diagnosed wheel speed sensor. Says I need new hub assembly. Just checking to see if this is so. Thanks, Larry
Le Mans Master
Joined: Sep 2003
Posts: 5,874
Likes: 0
From: Littleton CO
It's possible. The front bearing/hub assemblies have the sensor built in. I'd make sure that he tried cleaning the harness connectors, etc. or somehow verified that the sensor was bad, since the parts are pretty expensive.
For the rear, speed sensors have nothing to do with the hub assemblies.
For the rear, speed sensors have nothing to do with the hub assemblies.
Instructor
Joined: Feb 2007
Posts: 121
Likes: 0
From: Wellington Fl
Hi,
He may be right, I had the same problem, used the FSM to troubleshoot and even went so far as to swap the front hubs to verify myself. Installed new fromt hub assy and problem went away.
But first like was suggested check all connects and clean before you do anything, especially the connection on the hub assy itself.
Good luck
He may be right, I had the same problem, used the FSM to troubleshoot and even went so far as to swap the front hubs to verify myself. Installed new fromt hub assy and problem went away.
But first like was suggested check all connects and clean before you do anything, especially the connection on the hub assy itself.
Good luck
