Leaking around tie rod boot
Thread Starter
1st Gear
Joined: Sep 2007
Posts: 1
Likes: 0
Leaking around tie rod boot
My son's 1987 vette has a leak around the tie rod boot on the right steering tie rod. I imagine the seal is shot. Will I need to replace the entire steering gear (rack assembly) or can I just replace the seals/bushing in the assembly? How much is the steering gear/rack assembly? How much are replacement bushings?
I am not up to speed on all this car stuff and good assistance is appreciated.
Thanks
I am not up to speed on all this car stuff and good assistance is appreciated.
Thanks
Race Director
Joined: May 2006
Posts: 10,691
Likes: 71
From: Phoenix Arizona
Just replace the rack, they are a real pain to rebuild. Rebuilt - $150-$250 at Autozone or the like, and there is no difference (as far as swaping) between the standard and sport steering.
Le Mans Master
Joined: May 2004
Posts: 5,866
Likes: 60
From: Hellinois
Finalist 2020 C4 of the Year - Modified
I beg to differ, there is a difference between the standard steering and the Z51. There is a small round "cap" on the bottom of the rack and there is a letter on it, that is the code you need to get the correct rack. If this is incorrect then someone will correct me. It is much easier to swap the entire unit though.
