Project Update
Thread Starter
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Project Update
Today I managed to get the crank hub off, then I was able to do some more work. I think I pinpointed my oil leak!! http://24.17.202.123/GRAPHICS/CORVET...no_oil_pan.jpg I have no oil pan! Well, at least I don't now. That allowed me to get the timing chain cover off and clean all that mess up. I removed the drive for the water pump and plugged that hole in the timing chain cover. I put the timing cover back on, now I just need to put the oil pan back on and then everything else. I hope to get my headers soon, they should go in easy. I could put a good portion of the car back together tonight but I'm just too tired.
Anyway, here are some more pictures of the project, my garage, etc.
http://24.17.202.123/GRAPHICS/CORVET...converters.jpg http://24.17.202.123/GRAPHICS/CORVET...ming_cover.jpg http://24.17.202.123/GRAPHICS/CORVET...ers/garage.jpg http://24.17.202.123/GRAPHICS/CORVET...ge_company.jpg http://24.17.202.123/GRAPHICS/CORVET...s/on_ramps.jpg http://24.17.202.123/GRAPHICS/CORVET...tr55_close.jpg http://24.17.202.123/GRAPHICS/CORVET...r55_close2.jpg
Anyway, here are some more pictures of the project, my garage, etc.
http://24.17.202.123/GRAPHICS/CORVET...converters.jpg http://24.17.202.123/GRAPHICS/CORVET...ming_cover.jpg http://24.17.202.123/GRAPHICS/CORVET...ers/garage.jpg http://24.17.202.123/GRAPHICS/CORVET...ge_company.jpg http://24.17.202.123/GRAPHICS/CORVET...s/on_ramps.jpg http://24.17.202.123/GRAPHICS/CORVET...tr55_close.jpg http://24.17.202.123/GRAPHICS/CORVET...r55_close2.jpg
