MSD help please.
Thread Starter
Melting Slicks
Joined: Oct 2001
Posts: 2,315
Likes: 110
From: Brandon Fl
MSD help please.
How do I take the MSD box out of the system and wire up the distributer to the coil? I have the 4 prong plug that goes from the car to the small cap dizzy and then there are two wire that come from the Dizzy a small red to 12V key and a white to the MSD box signal. Coming from the coil is a orange and a black. What do I take from the Dizzy to the coil and what do I run straight to power. I think the MSD box I have is no good. I double checked all my connections and wiring. I am getting no power to the coil from the box.
Any ideas would be a great help. Thanks.
Any ideas would be a great help. Thanks.
Safety Car
Joined: Nov 2004
Posts: 4,991
Likes: 5
From: The Pines South Jersey
http://www.msdignition.com/pdf/6%20series/pdf9.pdf
or this
http://www.msdignition.com/pdf/6%20series/pdf15.pdf
that should be what your looking at
install instructions
http://www.msdignition.com/pdf/6%20series/6series.pdf
or this
http://www.msdignition.com/pdf/6%20series/pdf15.pdf
that should be what your looking at
install instructions
http://www.msdignition.com/pdf/6%20series/6series.pdf
Last edited by _twisted_; Nov 10, 2007 at 09:27 PM. Reason: added text
