Good price for a super ram?
Thread Starter
Advanced
Joined: Oct 2007
Posts: 89
Likes: 0
From: Peoria Illinois
Good price for a super ram?
Ive been debating whether or not this auction is worth it.
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=007
What is the most I should pay for that auction?
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=007
What is the most I should pay for that auction?
Melting Slicks
Joined: Dec 2006
Posts: 3,374
Likes: 86
From: Corbin KY
Ive been debating whether or not this auction is worth it.
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=007
What is the most I should pay for that auction?
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=007
What is the most I should pay for that auction?
That all depends on how bad you want it.
Melting Slicks
Joined: Dec 2006
Posts: 3,374
Likes: 86
From: Corbin KY
I would buy it with the intent of using JUST the cast intake parts and not the whole setup. You have NO idea of knowing if the injectors, ECM, harness, etc is any good OR will even work for your car until you put it on and see what happens. If you pay what you think the intake setup minus all the extras I would say that you got your moneys worth. FYI: I have seen SR go from 500 to over 1K depending on what condition it was in. do a search on here and you can see what they have sold for.
Pro
Joined: Jul 2006
Posts: 636
Likes: 0
From: Cheshire Connecticut
I would buy it with the intent of using JUST the cast intake parts and not the whole setup. You have NO idea of knowing if the injectors, ECM, harness, etc is any good OR will even work for your car until you put it on and see what happens. If you pay what you think the intake setup minus all the extras I would say that you got your moneys worth. FYI: I have seen SR go from 500 to over 1K depending on what condition it was in. do a search on here and you can see what they have sold for. LJ
Former Vendor
Joined: Nov 2006
Posts: 2,482
Likes: 3
From: Carmichael ca
Looks like the auction is over. Be patient one will come up here on the forum, its where I found mine. I think they were around $1400-$1500 new, so you can judge the cost from that.
Good Luck, Paul
Good Luck, Paul
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Advanced
Joined: Oct 2007
Posts: 89
Likes: 0
From: Peoria Illinois
Le Mans Master
Joined: Jul 2001
Posts: 6,252
Likes: 2
From: Silicon Valley Kalifornia
Considering that they are out of production (last I heard): Years ago I paid $799.95 for the Superram and $459.95 for the accel base....the fleabay price was not too expensive considering the laws of supply/demand.
Le Mans Master
Joined: Dec 2002
Posts: 5,270
Likes: 3
From: Seattle Area WA
A good/normal deal on the forum for the SR plenum, lid, runners and base is 750$ +/- based on fuel rail and TB.
And I would expect that to be slightly elevated with the lack of production.
And I would expect that to be slightly elevated with the lack of production.
Le Mans Master
Joined: Dec 2002
Posts: 5,270
Likes: 3
From: Seattle Area WA
He got a lot of stuff and if he needed it...and it works, I think he got a really good deal. It looks nice and all the extras probably total up to what he paid, lets just hope it really is all functional...
I will say this, I have a SR on my car right now and I've been debating playing with a custom intake, originally I was going to sell it to fund the other intake, but now I think if/when I do that, I'll just hang on to it. It is one of the ones that doesn't have leak issues and it just makes great street power. If I was selling it today, I'd probably price it at ~1k. But then again not everyone likes them that much, so hopefully you can find a better deal.
I will say this, I have a SR on my car right now and I've been debating playing with a custom intake, originally I was going to sell it to fund the other intake, but now I think if/when I do that, I'll just hang on to it. It is one of the ones that doesn't have leak issues and it just makes great street power. If I was selling it today, I'd probably price it at ~1k. But then again not everyone likes them that much, so hopefully you can find a better deal.
Racer
Joined: Sep 2005
Posts: 304
Likes: 1
From: Carson City Nevada
They are in production and are sold in several places including summit. Here's the link.
http://store.summitracing.com/egnsea...115+4294783153
http://store.summitracing.com/egnsea...115+4294783153
Safety Car
Joined: Jan 2006
Posts: 3,566
Likes: 4
From: Mt Laurel NJ
St. Jude Donor '06-'07
Safety Car
Joined: Jan 2006
Posts: 3,566
Likes: 4
From: Mt Laurel NJ
St. Jude Donor '06-'07
