Has anyone installed..
Thread Starter
Advanced
Joined: Aug 2007
Posts: 57
Likes: 0
From: Yorkville IL
Has anyone installed..
the muffler eliminators kits that are out there for our cars. I would like the car to be just a bit louder, but more importantly to me I would like the sound to be deeper and throaty.
Just wondering.
Thanks
Just wondering.
Thanks
6th Gear
Joined: Jun 2007
Posts: 6
Likes: 0
I put them on my 96 auto.They were horrible.At low speed the drone inside was very loud and at high rpm there was no sound at all? I luckily found a used Corsa exhaust on ebay the same day and drove 700 miles to pick it up thats how bad it was.But I am very happy now because the Corsa sounds awesome .Zero drone and volume increases with rpm as it should.
Team Owner
Joined: May 2002
Posts: 24,337
Likes: 25
From: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
Screw the boltons, just go to your local exhaust shop and have it done with some bare tubing. You'll either love it or hate it. Drone is surprisingly nonexistent on my TPI, can't speak for the lt1
Instructor
Joined: May 2007
Posts: 209
Likes: 0
From: greensboro nc
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
-----
Joined: Jul 2004
Posts: 1,165
Likes: 21
From: Virginia
Melting Slicks
Joined: May 2000
Posts: 2,148
Likes: 1
From: Chandler AZ
I can't believe what people will pay for a piece of steel tubing if you give it a fancy name like "muffler eliminator" ....I have this old cat I could market as an "organic waste disposal unit"; or maybe a "clean carpet eliminator"?
