Cam Change
11-26-2001, 07:43 AM
#1
Drifting
Thread Starter
Member Since: Aug 2001
Location: EP Texas
Posts: 1,878
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Contributor
Cam Change
Will it hurt, or speed up the destruction of a very high milage (150K), yet strong motor that has 175-180PSI per cylinder with on smoke/oil burning?
Had a camaro once, and did a high mile cam change with new lifter springs and rockers, needed a new motor maybe less that 15K later. Wondering if I should keep going until I run out of bolt-ons or money, or change any of the internals?
Had a camaro once, and did a high mile cam change with new lifter springs and rockers, needed a new motor maybe less that 15K later. Wondering if I should keep going until I run out of bolt-ons or money, or change any of the internals?
11-26-2001, 06:26 PM
#2
Melting Slicks
Re: Cam Change (TexCorvette)
If it were me, I would do a rebuild, because with that new cam I would be tempted to test out the new power quite often and then with the much more frequent trips to 6000 rpms, somethings eventually gonna give.
