Remove cold start valve 85-88
Thread Starter
Le Mans Master
Joined: Aug 2006
Posts: 7,698
Likes: 0
From: Just the Tip... Just to see how it feels...
Remove cold start valve 85-88
Without replacing the left bank fuel rail, how do you plug up the fitting area where the cold start valve attaches to?
Can an ORB/AN fitting replace the fitting for the cold start valve?
I was reading under a google lead that there is a fitting with a schrader valve on the opposite end of the ORB fitting to close off fuel pressure...
Any help to find this fitting?
Thanks as always guys.
John
Can an ORB/AN fitting replace the fitting for the cold start valve?
I was reading under a google lead that there is a fitting with a schrader valve on the opposite end of the ORB fitting to close off fuel pressure...
Any help to find this fitting?
Thanks as always guys.
John
Last edited by zo1boy; Jan 10, 2008 at 07:26 PM.
Pro
Joined: Jun 2007
Posts: 626
Likes: 2
From: Coquitlam British Columbia
Accel has a kit that plugs the back of the fuel rail and a bolt in cover where the cold start injector went into the intake. Did this to my 1988 Formula 350 Firebird..neat install. I dont have the p/n any more but got it from Summit.
Race Director
Joined: Sep 2003
Posts: 16,837
Likes: 338
From: Database Error Indiana
http://www.hotrodlane.cc/08%20catalo...talogMAIN.html
They sell plugs for it here. Made it easier. page 62 or 63 I think.
They sell plugs for it here. Made it easier. page 62 or 63 I think.
Last edited by JackDidley; Jan 10, 2008 at 08:41 PM.
