Honey, i shrunk the wheelbase
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,753
Likes: 14
From: backwoods upstate ny
Honey, i shrunk the wheelbase
thinking to relocate the front crossmember/ suspension forward abt an inch to make room for a rat motor...looks too ez to be true...anybody done this already???
btw, prelim investigation appears that my front wheels, and several other c4's that i have access to, ARE too far back for ''esthetics of design''..comments??
btw, prelim investigation appears that my front wheels, and several other c4's that i have access to, ARE too far back for ''esthetics of design''..comments??
Le Mans Master
Joined: Jan 2002
Posts: 9,036
Likes: 13
From: Edmonton AB
When the V-12 C4 was built, the front was extended to accomodate
the increased length of the Falconer engine. This car had extended
front panels as well as chassis modifications.
From SuperChevy
GM built a BBC C4 known as the ZR-2 as an engineering study. I do
not recall whether the front cross member was relocated but given
enough incentive, I could probably pull out a magazine article about the
car and see whether this is mentioned ...
.
the increased length of the Falconer engine. This car had extended
front panels as well as chassis modifications.
From SuperChevy
GM built a BBC C4 known as the ZR-2 as an engineering study. I do
not recall whether the front cross member was relocated but given
enough incentive, I could probably pull out a magazine article about the
car and see whether this is mentioned ...
.
