Q? about differential
Thread Starter
Pro
Joined: Jul 2006
Posts: 636
Likes: 0
From: Cheshire Connecticut
Q? about differential
So I bought a used Dana 36/3.07 to replace the stock in my '88. When I cleaned it up there was a 356 on the ring. I can't find anything that says 3.07 but on the case on the outside (written with a marker). What does the 356 mean? Does it mean that I got the wrong part? Should it say 3.07 somewhere on the ring? Thanks for your help.
LJ
LJ
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
The ring gear and pinion are stamped with the ratio expressed as shown in the link .
In this case , 38:11 =3.45
http://forums.corvetteforum.com/show...hlight=dana+44
In this case , 38:11 =3.45
http://forums.corvetteforum.com/show...hlight=dana+44
Thread Starter
Pro
Joined: Jul 2006
Posts: 636
Likes: 0
From: Cheshire Connecticut
Thread Starter
Pro
Joined: Jul 2006
Posts: 636
Likes: 0
From: Cheshire Connecticut
The ring gear and pinion are stamped with the ratio expressed as shown in the link .
In this case , 38:11 =3.45
http://forums.corvetteforum.com/show...hlight=dana+44
In this case , 38:11 =3.45
http://forums.corvetteforum.com/show...hlight=dana+44
Le Mans Master
Joined: Aug 2000
Posts: 8,838
Likes: 31
From: Australia
Thread Starter
Pro
Joined: Jul 2006
Posts: 636
Likes: 0
From: Cheshire Connecticut
LJ
