Looking for a new Mechanic!!!
Thread Starter
Safety Car
Joined: Nov 1999
Posts: 3,891
Likes: 2
From: Houston, TX
Looking for a new Mechanic!!!
We are looking for another mechanic for our shop and we figured the best place to start in the middle of a group of enthusiasts!!! The prospect should have LS1/LT1 experience, be able to weld, set up gears, etc. The more experience the better.
This would be a full time position. Pay would be based on experience.
We are dedicated to providing ONLY THE BEST in serivice and support.
You can reach me, Chris, at 281-370-2254 or 281-866-7000.
the position is available now!
Thank you and I look forward to hearing from you.
This would be a full time position. Pay would be based on experience.
We are dedicated to providing ONLY THE BEST in serivice and support.
You can reach me, Chris, at 281-370-2254 or 281-866-7000.
the position is available now!
Thank you and I look forward to hearing from you.
Melting Slicks
Joined: Aug 2000
Posts: 2,182
Likes: 0
From: Concord NC
Re: Looking for a new Mechanic!!! (Chris@SpeedDemon)
Chris, pretty :cool: starting here to fill your position. That's the kind of thing that will stand out in my memory when it's time to add go fast goodies!
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Re: Looking for a new Mechanic!!! (Chris@SpeedDemon)
Hmm, I'd love to get paid well to work on cars. I don't have the most experience, but I could easily learn. The problem is I don't think you'd be willing to move your shop to Bowling Green.
Le Mans Master
Joined: Oct 1999
Posts: 9,713
Likes: 3
From: Sachse Texas
Cruise-In I Veteran
Cruise-In II Veteran
Re: Looking for a new Mechanic!!! (Nathan Plemons)
Speaking of Mechanics...I found an old picture from about a year and a half ago with ChrisK in it. Way back when he was still able to feed himself working at Compaq. ;)
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Aug 2001
Posts: 2,516
Likes: 0
From: Lockport NY
Re: Looking for a new Mechanic!!! (Vette92)
Speaking of Mechanics...I found an old picture from about a year and a half ago with ChrisK in it...
...You're not a *real* Corvette C4 mechanic unless you're sitting on the tire with your legs in the wheel well opening!... :p:
Team Owner
Joined: Aug 2000
Posts: 40,156
Likes: 45
From: San Pedro CA
Re: Looking for a new Mechanic!!! (Chris@SpeedDemon)
lets see... I am unemployed... know enough about LT1's to be dangerous... :)
I can solder like a crazy man, but have no clue about welding....
and I kinda hope the LS1 and the LT1 are simular enough that I could fake it... :D
thats about it... oh, willing to relocate!!!
I can solder like a crazy man, but have no clue about welding....
and I kinda hope the LS1 and the LT1 are simular enough that I could fake it... :D
thats about it... oh, willing to relocate!!!